Page 2 - See page 7; for easy instructions.; Important Product Information
Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. STOP! See page 7 for easy instructions. You must install andcharge batteries beforeusing the telephone. Please also read Impor...
Page 4 - Quick reference guide; CID; Handset; Feature Menu
2 Getting Started Off/Clear During a call, press to hang up. While using menus, press to cancel anoperation, back up to the previousmenu, or exit the menu display. Quick reference guide Mute/Delete Press to mute microphone (see page 9).While reviewing call log, press and hold toclear Caller ID log (...
Page 6 - Parts checklist
4 Getting Started Parts checklist Remember to save your sales receipt and original packaging in case you ever need toship your telephone for warranty service. Check to make sure the telephone packageincludes the following: Telephone base Poweradapter Belt clip Battery pack Telephone line cord Teleph...
Page 7 - Before you begin; About Caller Identification
5 Getting Started Before you begin About Caller Identification Caller ID with Call Waiting features inthis telephone let you see who’s callingbefore you answer the phone, evenwhen you’re on another call. Thesefeatures require services provided byyour local telephone company.Contact your telephone se...
Page 8 - Telephone base installation
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111. Be sure to use an electrical outlet not controlled by a wall switch. 6 Getting Started Telephone base installation Install the telephone base as shown below. Choose a base location away from ele...
Page 9 - Battery installation & charging
7 Getting Started Battery installation & charging After installation, place the handset in the base and allow to charge for 15 hours beforeuse. You can keep the battery charged by returning the handset to the base after eachuse. When the battery is fully depleted, a recharge takes about 15 hours...
Page 10 - Belt clip & optional headset
8 Getting Started Belt clip & optional headset Install belt clip as shown below if desired.For hands-free telephone conversations, you can use any industry standard 2.5 mmheadset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches onside of handse...
Page 11 - Basic operation; Making and answering calls
9 Telephone Operation Basic operation Making and answering calls To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER , then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first,then press PHONE or SP...
Page 12 - Options while on calls; Volume control; Call waiting; Ring silencing; Temporary tone dialing
10 Telephone Operation Options while on calls Volume control Press VOLUME buttons on the side of the handset to adjust listening volume. Each button press raises orlowers volume by one level.When you change the volume level, the new settingbecomes the default. The new volume level will beapplied eac...
Page 13 - Handset locator; If you misplace the handset, press; or any dial pad button at the handset, or
11 Telephone Operation Handset locator If you misplace the handset, press HANDSET LOCATOR at the base. The handset will beep for 60 seconds tohelp you locate it. To stop the beeping, press PHONE, SPEAKER, or any dial pad button at the handset, or press HANDSET LOCATOR at the base. 91-000040-010-000_...
Page 14 - Handset settings; Ringer volume
12 Telephone Operation Handset settings At the feature menu you can change settings to customize how the telephone works. Press MENU , then use the ^V buttons to scroll to the feature you want to change. As you scroll throughthe menu, the top menu item is always highlighted witha > character. Pre...
Page 15 - Handset name
13 Telephone Operation Handset settings Handset name At this menu you can customize the name that appearson the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (seepage 21 to enter letters). Press SELECT...
Page 16 - AM; Display light switch
14 Clock RadioOperation The built-in clock radio with wakeup alarm includes thefollowing features:• Large, bright current time display• Full spectrum AM/FM station tuning• Dual-function station tuning (manual or auto-search)• One-touch tuning for up to 10 stations (5 AM, 5 FM)• Dual-function wakeup ...
Page 17 - To set the clock; until the display begins
15 Clock Radio Operation To set the clock You should set the clock so the alarm function canawaken you at the correct time of day.Press and hold SET CLOCK until the display begins blinking, then follow the steps at left to set the clock.While setting the clock, you can press HOUR or MIN to advance b...
Page 18 - To set the wakeup alarm; To set the wakeup time
16 Clock Radio Operation To set the wakeup alarm To set the wakeup time To set the alarm clock, press and hold WAKE TIME until the display begins blinking, then follow the steps at leftto set your desired wakeup time.While setting the wakeup time, you can press HOUR or MIN to advance by 1 digit, or ...
Page 19 - To use the Snooze Alarm; Press the; To turn off the wakeup alarm; button again to
17 Clock Radio Operation To turn off the wakeup alarm To use the Snooze Alarm Press the SNOOZE button to turn off the alarm for 8 minutes. During the 8-minute snooze period, theSnooze icon will blink on the display. After 8 minutes,the alarm will again alert you. You can press the SNOOZE button as o...
Page 20 - Using the radio; Basic radio functions
18 Clock Radio Operation Using the radio Basic radio functions Press RADIO ON/OFF to turn the radio on or off. Press AM/FM to select a frequency band. Each time you turn on the radio it automatically tunesto the last station selected. Manual tuning In either AM or FM mode, press the TUNE buttons rep...
Page 21 - Setting the sleep timer; button at any time to see; . The “sleep” icon will disappear and the radio
19 Clock Radio Operation Setting the sleep timer The sleep timer allows you to set the radio to turn offautomatically after a specified period of time.Tune to the station you want, then follow the steps atleft to set the sleep timer. Each time you press SLEEP , the play time is reduced by 10 minutes...
Page 22 - Phone Directory; Memory capacity
20 Phone Directory Memory capacity The phone directory can store up to 50 entries. Eachentry can contain a number up to 32 digits, and a nameup to 16 letters long. A convenient search feature canhelp you find and dial numbers quickly (see page 22). Timeouts and error messages If you pause for too lo...
Page 23 - New phone directory entries; To create a new phone directory entry
21 Phone Directory New phone directory entries To create a new phone directory entry Press MENU twice to select DIRECTORY . Press V to highlight STORE . Press SELECT , then enter the telephone number when prompted. Use the dial pad to enter up to 32 digits, then press SELECT. You will be notified if...
Page 24 - Phone directory search; To browse through the directory; Viewing long numbers
22 Phone Directory Phone directory search Press DIR to display the first listing in the phone directory. You can then use the up/down arrows tobrowse through the directory, or search to find a spe-cific entry. Press OFF at any time to exit the directory. To browse through the directory To browse, pr...
Page 25 - To dial, change or delete entries; To dial a number; To delete an entry; To change a listing
23 Phone Directory To dial, change or delete entries To dial a number When any phone directory entry is displayed, press PHONE (or SPEAKER ) to dial the displayed number. To delete an entry When any phone directory entry is displayed, press DELETE to delete the displayed entry from the phone directo...
Page 26 - Caller ID Logs; How Caller ID works
24 Caller ID Logs How Caller ID works If you subscribe to Caller ID service provided by yourlocal phone company, information about each caller willbe displayed after the first ring. Information about the last 50 incoming calls is stored inyour call log. You can review the call log to find outwho has...
Page 27 - To review your call log
25 Caller ID Logs To review your call log To review your call log Press CID to review your call log. The most recent call is displayed first. Use the arrow buttons to scrollthrough the list as shown at left. To return a call Press PHONE (or SPEAKER ) to call the number as it is displayed. To change ...
Page 28 - Handset screen icons & alert tones; Indicator lights
26 Appendix Screen icons, indicator lights & tones Handset screen icons & alert tones Speakerphone in use. Ringer off. Battery charging (animated display). Low battery (flashing); place handset in base to recharge. MUTE Microphone is muted. NEW New calls (press CID to review call log). Happy...
Page 29 - In case of difficulty
27 Appendix Appendix In case of difficulty If you have difficulty with your phone, please try the suggestions below. For CustomerService, visit our web site at www.telephones.att.com , or call 1-800-222–3111. Telephone doesnot work at all • Make sure batteries are installed and charged correctly (se...
Page 30 - Technical specifications
28 Appendix Technical specifications RF Frequency Band(Handset to Base) 2401.056 MHz — 2482.272 MHz Output Power 20 dBm Sensitivity -96 dBm Modulation GFSK RF Frequency Band(Base to Handset) 2401.056 MHz — 2482.272 MHz Channels 95 Channel Spacing 864 KHz Operating Temperature 32°F — 122°F0°C — 50°C ...
Page 31 - Index
29 Appendix Appendix A AC adapter, 6 Alert tones, 26 Answering calls, 9 B Battery charging, 7 Battery installation, 7 Belt clip, 8 C Call logs, 24 Caller ID, 24 add entries to phone directory, 25 delete entries, 25 dial entries, 25 CID, 24 Clock radio operation, 14-19 D Delete Call Log entries, 25 D...
