AT&T 240 - Manual

3 Telephone Installation Table/Desk 1 Plug one end of the long line cord into thetelephone line jack. 2 Feed the line cord through the channel (so thephone will sit f lat). INSTALLATION Line cord Modular telephone wall jack Modular telephone wall jack Channel Telephoneline jack 3 Connect the other e...

5 Wall Installation 1 Reverse the handset tab. INSTALLATION Modular telephone wall jack Channel Telephone line jack Mounting area Line Cord 3 Feed the line cord into the channel and wind itaround and out of the mounting area as shown. 4 Connect the other end to a wall jack. 5 Mount the phone on the ...

6 Feature Settings Summary Default settings are marked with an asterisk (*). Option: Choice: W HICH L ANGUAGE Choose whether the ENGLISH* display appears in English, FRENCH French or Spanish. SPANISH C ONTRAST Adjust screen lighting to 1 2 3* 4 5 a comfortable level, from 1 (light) to 5 (dark). S ET...

7 Set Contrast You can adjust the screen lighting to a comfortablelevel from 1 (light) to 5 (dark). 1 Press and release N until the screen displays the current level and SET CONTRAST . 2 Press - or + until the screen displays your selection. 3 Press N . Set Home Area Code Your own area code is the a...

9 Making and Answering Calls To make or answer a call, lift the handset. 1 Handset Volume Adjust volume of what you hear through thehandset ( LO , MED or HI ). 2 Redial Lift the handset, then press to call the last number dialed (up to 32 digits).The number will be displayed on screen duringdialing....

10 1 New Call Light This light flashes when you have unreviewedcall information in the call history. 2 Flash Use F to activate phone company subscriber services such as 3-Way Calling orCall Waiting. 3 Clear Press to exit dialing, to exit storing a number in memory, to exit call history or atany time...

11 1 Directory Card Lift the plastic cover off the directory card to write the numbers (or names) stored intelephone memory on the card. Then, replacethe plastic cover. TELEPHONE MEMORY This telephone can store 13 telephone numbers,each up to 32 digits long. You can dial numbersstored in memory by p...

14 About Caller Identification When the first call is received, the unit sets thecurrent time and date automatically (you cannot setthem), and resets them each time a new call comesin. (The time and date show 12:00 AM and 1-01 until Caller ID information is received.) The unitautomatically adjusts f...

15 CALLER ID OPERATION 2 1 4 3 1 New Call Light This light flashes when you have unreviewedcalls in call history. To turn the light off, reviewall call records in call history. 2 Call History This product assigns each incoming call anumber from 1 to 70. The most recent call willhave the highest numb...

16 1 Display Dial Dial a displayed phone number while reviewingcalls in call history. 1 Press and release D . The screen displays the number being called. If thescreen displays ERROR , the present number cannot be dialed. 2 Lift the handset. You cannot use this feature to dial PRIVATE calls. 2 Displ...

17 Storing a Call Record into Memory 1 Lift the handset 2 Press + or - to display the call record you wish to store in memory. 3 Press P . 4 For one-touch dialing, press and release thememory button where you want to store thenumber (locations , , and ) — OR — For two-touch dialing, press m , then p...

18 Display Screen Messages Screen Displays: When: PRIVATE NAME The other party is blockingname information. PPP The other party is blockingnumber information. UNAVAILABLE Your phone company isunable to receiveinformation about thiscaller’s name. UUU Your phone company isunable to receiveinformation ...

19 If you have difficulty operating this phone, try thesuggestions below. For Customer Service, visit ourwebsite at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase. No Dial Tone • Make sure all plugs are connected properly. Inspect the line cord co...