Page 2 - CONTENTS
CONTENTS BEFORE YOU BEGIN .................1 About the Base and the Charger ..1About Caller Identification (Caller ID). .................................1 About Call History ........................1 INSTALLATION........................2 Base Installation ............................2Spare Charger I...
Page 3 - About the Base and the Charger; About Call History; BEFORE YOU BEGIN
About the Base and the Charger This cordless product provides you with two cordless handsets, a basestation and a spare charger. You can charge either handset in the base or inthe spare charger. You’ll need to connect the base to both AC power and amodular telephone jack. You’ll connect the spare ch...
Page 4 - Base Installation; INSTALLATION
Base Installation NOTE: Install the base unit and spare handset charger away from electronic equipment, such as personal computers, television sets ormicrowave ovens. Avoid excessive heat, cold, dust or moisture. 1 Connect the power cord to the base and an electrical outletnot controlled by a wall s...
Page 5 - Spare Charger Installation
INSTALLATION 3 4 Charge the handset battery. • Place the handset in the base (or the spare charger). • Charge the battery at least 12 hours. After the first charge, thebattery will charge in eight hours. 5 Check for dial tone. • After the batteries are charged, lift the handset and press P ; you sho...
Page 6 - Feature Setup Menu; Handset Volume; FEATURE SETUP
Feature Setup Menu NOTE: When you follow the directions to “Clear Message Waiting” or “Set Dial Mode” you change settings for BOTH handsets. All otherfeatures must be set separately at each handset. Press S to enter the Feature Setup menu. Use < or > to choose features, then press S to save yo...
Page 7 - Ring Volume; Ring Pattern
Ring Volume Adjust the volume of the handset ringer. Setting volume to 0 turns the ringer off. Default setting is 6 . 1 Press S . 2 Press < until the screen displays 3 Press S . The screen displays 4 Use the keypad to enter a volume setting ( 0 – 6 ) — OR — Press < or > to hear ring volumes...
Page 8 - Auto Answer; Key Click
Auto Answer When this feature is on, an incoming call is connected when you lift thehandset from the base or the charger (you don’t have to press P ). If the handset is not in the base or charger, you do have to press P to answer a call, regardless of the setting. The default setting is OFF . 1 Pres...
Page 9 - Key Lock; Disable Key Lock; Handset Name
Key Lock When this feature is on, the keypad cannot be used to dial calls. You canstill answer calls, but when the call is ended, the keypad lock is reactivated.The key lock icon is displayed on the screen when this feature is activated.The default setting is OFF . NOTE: To make an emergency call wh...
Page 11 - Set Dial Mode
Set Dial Mode NOTE: When you change the dial mode setting, BOTH handsets are affected. This phone comes set for touch tone ( DTMF ) dialing. If you have dial pulse (rotary) service, set the dial mode to PULSE . 1 Press S . 2 Press < until the screen displays 3 Press S . The screen displays 4 Pres...
Page 12 - TELEPHONE OPERATION; Making a Call; Answering a Call; Redial; Intercom
10 TELEPHONE OPERATION Making a Call 1 Press P , then dial the number — OR — Dial the number,then press P . 2 Press P again to end the call. Answering a Call 1 Press P to answer a call. 2 Press P again to end the call. NOTE: If you have the Auto Answerfeature turned on,you can answer acall by liftin...
Page 14 - Conference Calling; Mute
Conference Calling 1 If one handset is already on a call, you can connect the secondhandset to the call by pressing P . 2 Disconnect either or both handsets by pressing P . Mute 1 During a telephone conversation, mute the handset microphone bypressing . The other party will by unable to hear anythin...
Page 15 - Storing a Number and Name in Phone Book; Presses; TELEPHONE PHONE BOOK
This telephone can store up to 20 telephone numbers and names. Storinga number and name in one handset automatically stores it in both. Storing a Number and Name in Phone Book 1 Press S . 2 Press < until the screen displays 3 Press S . 4 Press < to select STORE . The screen displays 5 Press S ...
Page 16 - Dialing a Number in Phone Book; Editing a Number/Name in Phone Book; Deleting a Number/Name in Phone Book
Dialing a Number in Phone Book 1 Press m . 2 Enter the first letter of the stored name, then scroll using < or > — OR — Press < or > to scroll through memory locations. 3 Press P to dial the displayed number. Editing a Number/Name in Phone Book 1 Press m . 2 Press < or > to scroll ...
Page 17 - HEADLINE RIGHT; Reviewing Call History; Removing a Specific Call Record; CALLER ID OPERATION
HEADLINE RIGHT HEADLINE R-SUB 15 NOTE: Caller ID information is stored in both handsets. Removing a call record from one handset also removes it from the other. Reviewing Call History 1 Press S twice. The screen displays the most recent call in call history (call 1 is the most recent call). 2 Press ...
Page 18 - Storing a Call Record in Phone Book; Display Dial; Dialing Options
Storing a Call Record in Phone Book You can store a number received by Caller ID in the telephone phone book. 1 Press S twice. The screen displays the most recent call in call history (call 1 is the most recent call). 2 Press < or > to scroll through call history. 3 Press S to store displayed ...
Page 19 - BATTERIES; Battery Life; Charge the Handset Battery Pack
17 BATTERIES Battery Life Battery life depends on how far the handset is from the base, and otherenvironmental conditions. NOTE: For optimum performance, charge your handset on the base or charger every night. Charge the Handset Battery Pack • This battery should remain charged for up to three days....
Page 20 - Replace the Handset Battery Pack
18 Replace the Handset Battery Pack 1 Install the handset battery. Use only AT&T Battery 2422, SKU# 23402. 2 Charge the handset battery. • Place the handset in the base or charger. • Charge the battery for at least 12 hours. After the first charge,the battery will charge in eight hours. BATTERIE...
Page 21 - If the phone does not work at all, check these items first:; If you have no dial tone:
If you have difficulty operating this phone, try the suggestions below.For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase . If the phone does not work at all, check these items first: • Make sure the power co...
Page 22 - If the caller’s name or phone number is not displayed:; IN CASE OF DIFFICULTY
If you hear noise or interference when using the phone: • You may be out of range. Move closer to the base. • Household appliances plugged into the same circuit as the base cansometimes cause interference. Try moving the appliance or the base toanother outlet. • The layout of your home or office may...
