AT&T 135 - Manual
AT&T 135 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PA RTS CHECKLIST
- Page 3 – I N S TA L L AT I O N; Dial Mode Switch Selection; . Remove the base by sliding it sideways as indicated by; W a l l
- Page 4 – I N S TA L L ATION; . Connect short line cord to telephone.; Plug the 5-inch line cord into the LINE jack on the bot-; . Connect the line cord to the modular jack and mount; Figure 1
- Page 5 – O P E R AT I O N; Dial Mode
- Page 6 – M E M O RY; Memory Features; O P E R ATION
- Page 7 – Speed Dialing; To program numbers into memory:; . Enter telephone number. You will hear a click when
- Page 8 – IN CASE OF DIFFICULT Y; are dialed much more quickly.
Design Line
Telephone 135
U s e r’s Manu a l
Pa rt 2
© 1998 Philips Consumer Communications, L.P. All rights reserved.
Printed in Mexico. 848234050 Issue 1AT&T
AT&T 135 Quark pdf 7/22/98 11:26 AM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 PA RTS CHECKLIST Remember to save your sales receipt in case you ever needwarranty service, and make sure this telephone packageincludes the items shown below: 7-foot line cord 5-inch line cord Coiled handset cord T e l e p h o n e B a s e H a n d s e t R i n g e r V o l u m e Dial Mode S w i t c ...
2 I N S TA L L AT I O N Dial Mode Switch Selection Set the Dial Mode switch on the side of the set to TONE(touch tone) or PULSE (dial pulse/rotary) telephone service.Make sure you choose the correct dialing method; touchtone dialing will not work if you have dial pulse service. The temporary tone di...
I N S TA L L ATION (c o n t i n u e d ) 3 2 . Connect short line cord to telephone. Plug the 5-inch line cord into the LINE jack on the bot- tom of the phone. 3 . Reinstall the base. Turn the base so that the larger end is toward the bottomof the telephone. Reinstall the base by inserting the toptab...