AT&T 1185 - Manual

AT&T 1185

AT&T 1185 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

I N S TA L L AT I O N

Table/Desk Installation

¥

NOTE:

Install this telephone away from electronic

equipment, such as personal computers,television
sets or microwave ovens. Avoid excessive heat,cold,
dust or moistur e.

1

Connect the corded handset to the base.

2

Connect the telephone line cord. (figure a)

3

Connect the power cord to the base and
an electrical outlet not controlled by a wall
switch. (figure a) The answer ON/OFF light
goes on, and CL flashes in the message window.

Use only the power cord supplied with this
p ro d u c t . If you need a re p l a c e m e n t , call 1-800-
2 2 2 – 3 1 1 1 .

4

Check for dial tone .

• Lift the handset, you should hear a dial tone.

¥

NOTE:

For Wall Mount Installation see page 5 in the

User Manual.

Handset Charger Installation

1

Connect the power cord. Be sure to plug the cor d

into an electrical outlet not controlled by a wall
switch.

2

Install the handset batter y. Use NiCd Replacement
Battery 3301,SKU# 91076. (figure b)

3

Charge the handset batter y.

• Place the handset in the remote charging

stand.The CHARGING light goes on.

• Charge the battery at least 12 hours.

4

Check for dial tone .

• After the batteries are charged,lift the handset
and press

; you should hear a dial tone.

QUICK START GUIDE

2.4 GHz Corded Cordless
Telephone with Caller ID/Call
Waiting 1485/1185

Standard

electrical

outlet

Power Cord

Line Cord

figure b

figure a

Modular

telephone

jack

a) Remove battery

compartment
cover by
pressing on the
indentation and
sliding
downward.

c) Place battery pack in

compartment with
the wires in the
lower left corner,
along the bottom of
the battery pack.

b) Align two holes

in plug with
socket pins,
and snap the
plug into place .

d) Replace cover

by sliding it up
into place.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other AT&T Models

All AT&T Other