ATN ATN MArs x4 - Manual
ATN ATN MArs x4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ApplIcATIon; fEATuREs
- Page 3 – opERATIng; mounTIng
- Page 4 – conTRol; IR IllumInATIon
- Page 6 – wInDAgE AnD ElEvATIon; wARnIngs AnD cAuTIons; TRoublEshooTIng
- Page 7 – Warranty; lIfETImE lImITED pRoDucT wARRAnTy
u s e r ` s g u i d e
Important Export Restrictions ! Commodities, prod-
ucts, technologies and services contained in this manual
are subject to one or more of the export control laws and
regulations of the U.S. Government and they fall under the
control jurisdiction of either the US Department of State
or the US BIS-Department of Commerce. It is unlawful
and strictly prohibited to export, or attempt to export or
otherwise transfer or sell any hardware or technical data
or furnish any ser vice to any foreign person, whether
abroad or in the United States, for which a license or writ-
ten approval of the U.S. Government is required, without
first obtaining the required license or written approval
from the Depar tment of the U.S. Government having
jurisdiction. Diversion contrary to U.S. law is prohibited.
AmERIcAn
TEchnologIEs
nETwoRk
coRp.
ATN MArs x4
ATN MArs x6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp.ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.©2006 ATN Corp. All right reserved. ...
2 spEcIfIcATIons pREpARATIon foR opERATIon Before getting started make sure to follow these steps:• Install the battery into its housing with the polarity order shown on the main body of the unit. The CR123A battery used with adapter. Install adapter first, then CR123A . AA battery used without adap...
3 gence not more than 3mm. High of optical axe of the PS-22 under weaver rail is 49mm with A.R.M.S.#19 ACOG.6. Tighten the fixing screws or levers of mount. NOTE: Fixing screws may need to be tightened after continuous shooting. conTRol To turn the device on, rotate the Operation Switch from the OFF...
