ATN MK 8750 - Manuals - manualsarea.com

Page 3 - APPLICATION; MASTER POWER SWITCH; CONTROL PANEL

The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp.ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.©2002 ATN Corp. All right reserved. ...

Page 4 - INFRA-RED ILLUMINATION; RETICLE BRIGHTNESS ADJUSTMENT; LIGHT INTENSIFIER TUBE BRIGHTNESS ADJUSTMENT

3 4 INFRA-RED ILLUMINATION By pressing “SL” button three times you can switch to Red diode “I”. Red diode represents 100M infra-red illuminator’s bright- ness adjustment mode. Adjustments can be easily obser ved through the Aries scope while pressing” +” / ” -” adjustment but- tons.Infra-red illumin...

Page 5 - SLEEP MODE; PROXIMITY SENSOR

3 4 SLEEP MODE One of the greatest new features that your Smart scope has is the SLEEP mode. This feature has been designed to considerably extend the period of scope’s functioning, to set the scope to memo- rize your initial settings and endure battery’s life (by settings we mean only digital setti...

Page 6 - FOCUSING

5 6 FOCUSING To focus the Aries MK6600 / 6650 /7700 /7750 / 8700 / 8750 you need to adjust the diopter first thing. Simply turn the diopter clockwise until it stops. Then concentrate on any object and slowly turn the diopter back counter clockwise until the grain in the image is sharp.When you are u...

Page 7 - USING THE REMOTE CONTROL; RANGE FINDER

5 6 USING THE REMOTE CONTROL Below the control box you can find the panel with two screws to fix Aries MK6600 / 6650 /7700 /7750 / 8700 / 8750.To plug in the remote control, remove the screws and the small panel to disclose the inlet.The three remote control buttons’ function similarly to control bo...

Page 8 - PREPARATION FOR OPERATION; RETICLE PATTERNS

7 8 PREPARATION FOR OPERATION Before getting started make sure to follow these steps:• Take the scope out of the case.• Insert the batteries into their housing with the polarity order shown on the main body of the unit.• Switch on your MK6600 / 6650 /7700 /7750 / 8700 / 8750 scope by the master powe...

Page 9 - CLEANING THE EYEPIECE; WARNINGS AND CAUTIONS

7 8 CLEANING THE EYEPIECE You may need to clean the eyepiece of the riflescope from time to time in order to guarantee top per- formance. When you receive your riflescope you should check for dust on the eyepiece of the unit.First you will need to remove the eyepiece. To do that you will need to ini...

Page 11 - YEAR PRODUCT WARRANTY; LIMITATION OF LIABILITY; PRODUCT WARRANTY REGISTRATION

9 10 2 YEAR PRODUCT WARRANTY This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that is covered by the foregoing warranty occurs during the applicable period stat...