Page 2 - CE Mark Warning
The Atlantis Land logo is a registered trademark of Atlants Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. FCC Warning This equipment has been tested and ...
Page 3 - ABOUT THIS GUIDE; Ports; UNPACKING AND SETUP; LED I; TECHNICAL SPECIFICATIONS
i T A B L E O F C O N T E N T S ABOUT THIS GUIDE ....................................................... 1 T ERMS .............................................................................................. 1 O VERVIEW OF THIS U SER ’ S G UIDE ................................................... 1 ...
Page 4 - Terms
1 A B O U T T H I S G U I D E This user’s guide tells you how to install your 4(8)-port 10/100/1000Mbps Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network. Terms For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the 4(8)-port 10...
Page 5 - N T R O D U C T I O N; Gigabit Ethernet Technology
2 I N T R O D U C T I O N This section describes the features of the 4(8)-port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet, Fast Ethernet and Switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 8...
Page 6 - Fast Ethernet Technology
3 to perform 10 times the number of operations in the same amount of time. In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost-effective method to take advantage of today and tomorrow’s rapidly improving switching and routing internetworking technologies. And with ex...
Page 7 - Switching Technology; segments
4 environments, it provides a straightforward upgrade and takes advantage of the existing investment in hardware, software, and personnel training. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Etherne...
Page 8 - Features; Switch features include:; Performance features
5 Features The 4(8)-port 10/100/1000Mbps Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. Switch features include: Ports ♦ 4(8) 10/100/1000Mbps Gigabit Ethernet port Performan...
Page 9 - Unpacking; Four rubber feet with adhesive backing; Setup; The setup of the Switch can be performed using the following steps:
6 U N PA C K I N G A N D S E T U P This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One 4(8)-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Four r...
Page 10 - Desktop or Shelf Installation; Gigabit Ethernet Switch installed on a Desktop or Shelf
7 ♦ Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these...
Page 11 - Connecting Network Cable
8 mounting brackets on the switch’s front panel (one on each side) and secure them with the screws provided. Attaching the mounting brackets to the Switch Then, use the screws provided with the equipment rack to mount the Switch in the rack. Installing the Switch in an equipment rack Connecting Netw...
Page 12 - Power on; D E N T I F Y I N G
9 These ports are Auto-MDI type port, these ports can auto transform to MDI-II or MDI-X type, so you can just make an easy connection that without worrying if you are using a standard or crossover cable. Power on The 4(8)-port Gigabit Ethernet Switch can be used with AC power sources 100~240V AC, 50...
Page 13 - Front Panel; LED Indicators; Rear Panel; Switch
10 Front Panel The front panel of the Switch consists of 4(8) Gigabit Ethernet port, and LED indicators. LE D Indicato rs 100 0BAS E-T G ig a bi t E thern e t P o rts Front panel view of the 4-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Four(Eight) 10/100/1000Mbps Gigabit Ethernet ports ♦ Compreh...
Page 14 - AC Power Connector; This is a three-pronged connector that; indicators; This indicator lights green when the Switch is
11 ♦ AC Power Connector This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100 ~ 240 V AC at 50 ~ 60 Hz. LED Indicators The LED indicators o...
Page 15 - Product Support; or
12 ♦ 1000Mbps : These LED indicators are lighted up when there is a secure connection (or link) to 1000Mbps Gigabit Ethernet device at the desired port. ♦ 100Mbps: These LED indicators are lighted up when there is a secure connection (or link) to 100Mbps Fast Ethernet device at the desired port. Whe...
Page 16 - General
13 T E C H N I C A L S P E C I F I C AT I O N S General Standards: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 Auto-negotiation IEEE 802.3x Full duplex Flow Control Protocol: CSMA/CD Data Transfer Rate: Ethernet: 10Mbps (...
Page 17 - Physical and Environmental; Performance
14 Physical and Environmental AC inputs: 100 – 240 VAC, 50/60 Hz Power Consumption: 12 watts max(4 ports), 20 watts max (8 ports) Operating Temperature: 0 ~ 40 degrees Celsius Storage Temperature: -10 ~ 55 degree Celsius Humidity: 5% ~ 95% RH, non-condensing Dimensions: 280 mm x 180 mm x 44 mm EMI: ...
