Atlantis Land A02-F8-2C/M2 - Manual

2 I N T R O D U C T I O N This section describes the features of the 10-port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet, Fast Ethernet and Switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802...

3 to perform 10 times the number of operations in the same amount of time. In addition, the phenomenal bandwidth delivered by Gigabit Ethernet is the most cost-effective method to take advantage of today and tomorrow’s rapidly improving switching and routing internetworking technologies. And with ex...

4 environments, it provides a straightforward upgrade and takes advantage of the existing investment in hardware, software, and personnel training. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Etherne...

5 Features The 10-port 10/100/1000Mbps Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. Switch features include: Ports ♦ Two 10/100/1000Mbps Gigabit Ethernet port (port 9 ~ 10...

6 U N PA C K I N G A N D S E T U P This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One 10-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ Four rub...

7 ♦ Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch. Desktop or Shelf Installation When installing the Switch on a desktop or shelf, the rubber feet included with the device must be first attached. Attach these...

10 I D E N T I F Y I N G E X T E R N A L C O M P O N E N T S This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The front panel of the Switch consists of 8 10/100Mbps Ethernet ports, 2 10/100/1000Mbps Gigabit Ethernet port, and LED indicators. Figure 3-1....

11 Rear Panel The rear panel of the Switch consists of an AC power connector. The following shows the rear panel of the Switch. Figure 3-2. Rear panel view of the 10-port 10/100/1000Mbps Gigabit Ethernet Switch ♦ AC Power Connector This is a three-pronged connector that supports the power cord. Plug...

12 Figure 3-4. The 10-port 10/100/1000Mbps Gigabit Ethernet Switch LED indicators ♦ POWER After turning on the power, the Power indicator on the front panel should light to indicate the Switch is receiving power. ♦ SPEED The indicator lights amber when the port is connected to 1000Mbps Gigabit Ether...

13 Product Support If you continue to have problems you should contact the dealer where you bought this product. If you have any other questions you can contact the Atlantis Land company directly at the following address: AtlantisLand spa Via Gandhi 5 Ing2,Scala A 20017 Mazzo di Rho(MI) Tel: 02/9390...

15 Physical and Environmental AC inputs: 100 – 240 VAC, 50/60 Hz Power Consumption: 30 watts maximum Operating Temperature: 0 ~ 50 degrees Celsius Storage Temperature: -10 ~ 70 degree Celsius Humidity: 10% ~ 90% RH, non-condensing Dimensions: 280 mm x 180 mm x 44 mm EMI: FCC Class A, CE Mark Class A...