Ashly FR-16 - Manual
Ashly FR-16 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Front Panel; Rear Panel; FR Features; all devices it has been programmed to control, if any.
- Page 3 – Typical Application
- Page 4 – Connecting to a Network; tors have their own built-in release tab.; Power Over Ethernet; - FR remote controllers require class 2 IEEE 802.3af Power over; IP Address; secondary network connections should remain disabled.; Communication Failure Indicator; - If an assigned fader has lost contact with
- Page 5 – Mechanical Installation; The FR-16 will mount to a modular 7-gang US electrical box; , with a minimum box depth of
- Page 6 – Network Tree; all; Design Mode; the project canvas; Main Control Surface
- Page 7 – Global Features; same
- Page 8 – Fader Specific Features; pre
- Page 9 – Other Features; Note: Before unlocking the front; Factory Reset; words are case sensitive; Firmware Update (Flash
- Page 10 – Using Multiple Remote Controllers; Protea; Dimensions
- Page 11 – Panel Mount Cutout Pattern
- Page 12 – Function Label Template; the front panel overlay windows as shown below.
- Page 13 – Troubleshooting Tips:; The green signal level
- Page 14 – OBTAINING WARRANTY SERVICE:
FR-8 and FR-16 Remote Control
Operating Manual
Overview
The FR-8 and FR-16 are Ethernet-based remote controllers for all Ashly NE (network enabled)
products with DSP capabilities. Each fader and it’s push button LED can be programmed to adjust
signal level, select input source, or mute the signal. The FR remotes are ideal for networked sound
systems in meeting rooms, houses of worship, courtrooms, or other applications where simple but pro-
grammable real-time level control is required.
ASHLY AUDIO INC.
847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010
Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com
Features
• 8 or 16 Assignable Faders with Master
• Push Button Switches with LED
• Mute/Unmute per Fader
• A/B Source Select per Fader (optional)
• Two Signal Level Indicators per Fader
• User Defined Signal Level LED Threshold
• Assignable Fader Scaling
• Front Panel Lockout
• Communication Failure Indicator
• Automatic IP Addressing
• User Defined Label Inserts
• Wall Box or Panel Cut-Out Mounting
Requirements
• Ethernet Network
• IEEE 802.3af Power Over Ethernet (class 2)
• Ashly NE DSP Device
• PC Running Microsoft® Windows 7,
Vista, or XP, 32 & 64 bit
• Protea
ne
Software v5.11 or Higher
Compatible Devices
• ne24.24M
• NE Two-Channel Amplifiers (with DSP)
• NE Multi-Channel Amplifiers (with DSP)
• NE4800 and NE 8800 DSP Processors
• Pema Amplifiers
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Operating Manual - FR-8 and FR-16 Remote Level Controller 2 Front Panel 1) Push Button LED Label Window - Insert switch label made from Ashly template doc 2) Push Button LED - Used to switch fader Mute or fader A/B Source Select. LED also indicates signal level or fader status 3) Channel Fader - Adj...
3 Operating Manual - FR-8 and FR-16 Remote Level Controller Typical Application
Operating Manual - FR-8 and FR-16 Remote Level Controller 4 Connecting to a Network Network communication is made by wiring with standard Cat-5 Ethernet cable terminated with a RJ-45 or Neutrik etherCON connector through a network router, switch, hub, or patch panel to a PC running Protea NE Softw...
