ASA AOM681 - Manual
ASA AOM681 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important! – Please Read This Manual Before Installing!; Installation Location; must adhere to local laws and regulations.; Tampering; To prevent electrical shock,; DO NOT OPEN THE MONITOR CASE.; There are; Moisture
- Page 4 – CONTROLS AND OPERATION
- Page 5 – This control toggles the unit between “Day” and “Night”; Picture Adjustment Menu Button
- Page 6 – INSTALLATION INSTRUCTIONS; BEFORE YOU BEGIN INSTALLATION:
- Page 8 – TYPICAL SYSTEM CONNECTION
- Page 9 – REAR OBSERVATION INSTALLATION; DISTANCE MARKER USE/INSTALLATION; FIGURE B; WIDTH OF VEHICLE
- Page 10 – SIDE
- Page 11 – TROUBLESHOOTING; SYMPTOM; ACCESSORY LIST
- Page 12 – PRODUCT SPECIFICATIONS; W x
1
AOM681
6.8” FLAT PANEL COLOR OBSERVATION
MONITOR OWNER’S MANUAL
AOM681 Features:
?
6.8” High Performance Color LCD
?
Water Resistant Design
?
Built-in Audio Speaker with Volume Control
and 12V Trigger
?
2 Camera (A/V) Input with A/B Select Control
?
Backlit Controls and Day/Night Picture Modes
for Nighttime Use
?
Auto/Manual Power On
?
Sun Visor Included
Visit us at http://www.asaelectronics.com
PPLICATIONS, L.L.C.
UDIOVOX
PECIALIZED
R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM681 LCD Observation Monitor. With proper installation and use, your AOM681 is designed to provide you with years of trouble-free operation. This manual contains important information required t...
4 CONTROLS AND OPERATION 1. Power/Stand-By Button The AOM681 has two possible operation modes for turning the unit on/off. In manual mode, the power button is used to turn the unit on/off. In stand-by mode, the unit automatically turns on only when 12V is applied to the stand-by trigger wire. For MA...
5 3. Day/Night Mode Button This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode, the LCD backlight intensity is at maximum. In “Night” mode, the LCD backlight is dimmed to a preset level that is more suitable for low light operation. 4. Picture Adjustment...
