APC SMX2000RMLV2UNC - Manual
This Installation Manual covers the APC Smart-UPS X-Series external battery pack system, focusing on setup procedures, safety precautions, and environmental requirements. Key topics include proper rack mounting, electrical hazard warnings, ventilation guidelines, and compatibility considerations for both rack-mounted and tower configurations. The manual also addresses servicing, troubleshooting, and warranty details while emphasizing indoor use and correct handling of the UPS components.
Table of Contents:
- Page 1 – External Battery Pack Kit Contents and Environmental Specifications
- Page 2 – Installation Procedures and Safety Warnings for XLBP Mounting
- Page 3 – Rack Configuration Installation using Rail Kits
- Page 4 – Conversion from Rack to Tower Configuration
- Page 5 – Connecting External Battery Packs
- Page 6 – Servicing, Support, and Transportation Guidelines
- Page 7 – Two-Year Factory Warranty Terms
Smart-UPS
®
X-Series 120 VDC
External Battery Pack Installation
Inventory
Safety and General Information
Read the Safety Guide included in the package before installation.
This unit is intended for indoor use only.
Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
Be sure the air vents on the external battery packs (XLBPs) are not blocked. Allow adequate space for proper
ventilation.
The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient
temperatures, poor quality utility power, and frequent short duration discharges will shorten battery life.
Always install the XLBPs at the bottom of the rack. The UPS must be installed above the XLBPs.
Specifications
For additional specifications, refer to the APC web site at www.apc.com.
Environmental
(1)
(1)
(6)
(4)
(1)
(1)
(2)
(2)
(2)
Temperature
Operating
0° to 40° C (32° to 104° F)
Storage
-15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation
Operating
3,000 m (10,000 ft)
Storage
15,000 m (50,000 ft)
Humidity
0% to 95% relative humidity, non-condensing
s
u
0
5
7
7
b
s
u
0
4
3
4
a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- APC
- Model
- SMX2000RMLV2UNC
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- File size
- 213.8 KB
- Format
Summary
Details of components included in the kit, safety guidelines, general installation procedures, and environmental specifications for operating and storing the battery packs.
Instructions for installing the Smart-UPS X-Series XLBP, electrical hazard warnings, jewelry removal guidance, mounting guidelines below the UPS in a rack, and diagrams for removing brackets and batteries.
Step-by-step instructions for installing the Smart-UPS X-Series XLBP in both four-post and two-post rack configurations, including mounting hardware and rail kit usage diagrams.
