APC CTFLP Series - Manual
APC CTFLP Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Chapter 1 General Information; Safety; Changes and modifications to this unit not expressly; Do not work alone under hazardous conditions.
- Page 4 – Specifications; Environmental Specifications
- Page 5 – Chapter 2 Installation and Maintenance; Unpacking; CTFLP Enclosure; Model Number; Mounting Bracket
- Page 6 – INDEX ITEM; Bottom View
- Page 8 – Installing the FLM Power Supply; Ensure the CTFLP module circuit breaker is OFF.
- Page 10 – Chapter 3 Operation; Initial Startup and Performance Verification; Switch the utility circuit breaker ON.; Shut Down; Switch the utility circuit breaker OFF.; Auxiliary Power Supply; Set up an auxiliary utility generator and calibrate to 60 Hz ± 1 Hz.; For details regarding available options see the APC web site
- Page 11 – Chapter 4 Troubleshooting and Maintenance; Troubleshooting Power Supply Failure; Routine Maintenance Schedule; Operation Interval; to Initial Startup and Performance
- Page 12 – Routine Maintenance Procedures; Visual Inspection; Replacement Procedures; Wiring Harness Replacement
- Page 13 – Indicator Lamp Replacement; Initial Startup and Performance
- Page 14 – Chapter 5 Service, Contact and Warranty Information; Service; Support
990-5519 02/2003
BroadBand CTFLP Series
Uninterruptible Power Supply
User’s Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Chapter 1 General Information The CTFLP Series provides an uninterruptible power source for broadband cable operations. The enclosure is designed for mounting on either a pole or wall. Safety This Safety Guide contains important instructions that should be followed during installation and maintena...
2 Specifications Environmental Specifications Operating Temperature -40º F to 158º F (-40º C to 70º C) Humidity 5% to 95% noncondensing within enclosure Physical Specifications Characteristic Specification Height X Width X Depth 11.4” X 8.5” X 7.1” (29 cm X 22 cm X 18 cm ) Weight 36 lbs (16 kg) Elec...
3 Chapter 2 Installation and Maintenance Only trained service personnel should install and maintain the Power Supply. Prior to installing the Power Supply utility line voltage must be routed to the enclosure. Local, state, federal and/or National Electric Code (NEC) regulations regarding location, p...
