APC BX1300G - Manual
APC BX1300G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Overview; select; Installation; on the rear
- Page 3 – Connect the Equipment; If the red; Building Wiring Fault; Data port
- Page 4 – Operation; Power-Saving LCD screen
- Page 5 – Front panel buttons and display; Front panel
- Page 6 – Modes of operation; Press; to scroll through the display screens.; Status indicators; On Line Mode; Status
- Page 7 – Feature Quick-Reference
- Page 8 – Troubleshooting; Problem; and; The; LED is
- Page 9 – section of the manual to eliminate common problems.; For the UPS, always DISCONNECT THE BATTERY before
- Page 10 – Internet
Installation and Operation
Back-UPS
™
BX1300G/BN1350G/BX1500G
Inventory
Safety and General Information
Connect the Battery
The battery charges fully during the first 16 hours while the Back-UPS is operating on AC power. Do not
expect full battery runtime capability during the initial charge period.
Battery wear is not covered by the Limited Warranty.
There are no serviceable parts in the Back-UPS. Do not attempt to open or repair the Back-UPS as this
will void the warranty. The battery in this unit is not replaceable. Contact APC through customer
support. Refer to the contact information at the end of this manual.
This unit is intended for indoor use only.
Do not operate this unit in direct sunlight, in contact with fluids, or where there is
excessive dust or humidity.
The battery typically lasts for two to five years. Environmental factors impact battery
life. Elevated ambient temperatures, poor quality AC power, and frequent short
duration discharges will shorten battery life.
Connect the Back-UPS power cable directly into a wall outlet. Do not use surge
protectors or extension cords.
b
u
0
01a
bu
055
a
bu0
57
a
b
u
05
9a
bu0
58
a
bu
060
a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500G 2 PowerChute ™ Personal Edition Software Overview PowerChute Personal Edition Software allows you to use your computer to access additional power protection and management features of the Back-UPS. Using PowerChute, you can: • Preserve work...
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500G 3 Connect the Equipment Turn On the Back-UPS Press the Power ON button located on the top of the Back-UPS. The Power On LED will illuminate and a single short beep will be audible to indicate that the Back-UPS is providing protection for co...
Installation and Operation Back-UPS BX1300G/BN1350G/BX1500G 4 Operation Power-Saving feature This Back-UPS is equipped with power saving outlets that conserve electricity. Configure the Back-UPS to recognize a Master device, such as a computer or an A/V receiver, and controlled peripheral devices, s...
