APC 990-5520B - Manual
APC 990-5520B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Chapter 1 General Information; Safety; Do not work alone under hazardous conditions.; Batteries must be recycled.; Deliver the battery to an appropriate recycling
- Page 4 – Chapter 2 Installation; Specifications; Models Supported; Model Number
- Page 5 – Environmental Specifications; Operating Temperature; Physical Specifications; Characteristic Specification
- Page 6 – Installing the Enclosure; Models may vary in appearance from those depicted below.; Install the Mounting Bracket on a Pole
- Page 7 – Ground Mount Installation
- Page 8 – Wiring; Grounding
- Page 9 – Options; For available options see your dealer or the APC Web site,; Connecting the Batteries; Tape one end of each jumper cable prior to installation.; Bottom Shelf
- Page 13 – Chapter 3 Service, Contact and Warranty Information; Service; Support
990-5520B 05/2004
Broadband CTEP/G Series
Zero, Three, Six Battery Pole/Ground Mount Enclosures
Four, Eight Battery Pole Mount Enclosures
120 V/240 V
User Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Chapter 1 General Information The CTEP/G Series Enclosures provide power sourcing for broadband cable operations. Safety This Safety Guide contains important instructions that should be followed during installation and maintenance of the APC equipment and batteries. It is intended for APC customer...
2 Chapter 2 Installation Prior to installing the power supply enclosure, a utility breaker box must be installed on the pole. Utility line voltage must be routed to the enclosure. Local, state, federal and/or National Electric Code (NEC) regulations regarding location, permits and electrical wiring ...
3 Specifications Environmental Specifications Operating Temperature -40º F to140º F (-40º C to 60º C) Humidity 5% to 95% noncondensing within enclosure Physical Specifications Characteristic Specification Height X Width X Depth CTEP0 CTEP3 CTEP4 CTEP6 CTEP8 14” x 24” x 16” (36 x 61 x 41 cm) 30” x 24...
