AMX AXC-232++ - Manual

AMX AXC-232++

AMX AXC-232++ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 3 – Table of Contents
  • Page 5 – Introduction; Specifications
  • Page 7 – Installation and Wiring; Setting the Internal Jumpers; Setting jumper JP1 to terminate RS-422 input with 100 ohms
  • Page 8 – Stop bits; is achieved by setting the DIP switch to 300 baud, and using the; BAUDMED; BAUDHIGH; section on page 9 for
  • Page 9 – Card Edge Pinouts
  • Page 10 – Using Hardware Handshaking
  • Page 11 – Replacing the Lithium Batteries
  • Page 13 – Programming
  • Page 15 – Axcess program characteristics
  • Page 16 – Send_String Escape Sequences
  • Page 18 – Xmodem Timing Commands; XX; AXlink Master Statements; channel
  • Page 19 – Reserved Channels; PROGRAM; MC; port is not practical (for example, in installations where the
Loading the manual

i n s t r u c t i o n m a n u a l

A x c e s s C o n t r o l C a r d s

AXC-232++

RS-232/422/485 Interface Card

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Table of Contents

Table of Contents i AXC-232++ RS-232/422/485 Interface Card Table of Contents Introduction ............................................................................................................... 1 Specifications ...................................................................................

Page 5 - Introduction; Specifications

Introduction 1 AXC-232++ RS-232/422/485 Interface Card Introduction Many audiovisual and computer-based devices can be remotely controlled using RS-232, RS-422, or RS-485 commands. The AXC-232++ RS-232/422/485 Interface Card can generate virtually unlimited numbers of product/function commands as th...

Page 7 - Installation and Wiring; Setting the Internal Jumpers; Setting jumper JP1 to terminate RS-422 input with 100 ohms

Installation and Wiring 3 AXC-232++ RS-232/422/485 Interface Card Installation and Wiring Setting the Internal Jumpers The AXC-232++ can be used as an independent RS-232/422/485-controlled interface by setting the internal jumpers (JP1 and JP2). FIG. 1 indicates the location of the jumpers on the ca...

Other AMX Models

All AMX Other