American Standard Triumph Cadet 3 - Manual
American Standard Triumph Cadet 3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Revised
© 2007 American Standard Inc.
TRIUMPHCADET
®
3
RIGHTHEIGHT™ELONGATEDTOILET
VITREOUSCHINA
TRIUMPHCADET
®
3
RIGHTHEIGHT™ELONGATEDTOILET
❑
2492.016
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/.6 gpf)
• 6-/2" rim height for accessible application
• Features the
Cadet®3FlushingSystem
• Elongated siphon action jetted bowl
• Fully-glazed 2-/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect™ tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 00% factory flush tested
• 5 year warranty
❑
3016.016
Right Height™ Elongated Bowl
❑
4007.100
Tank
NominalDimensions:
768 x 472 x 784mm (30-/4" x 8-9/6" x 30-7/8")
Fixture only, seat and supply by others
AlternateTankConfigurationsAvailable:
❑
4007.500
Tank complete with Aquaguard Liner
ComplianceCertifications-
MeetsorExceedstheFollowingSpecifications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
ToBeSpecified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Seat: #5325.00 Elongated Champion
®
Slow Close
solid plastic seat and cover with easy lift off feature
❏
Seat: #5284.06 Elongated EverClean™
anti-microbial
solid plastic seat and cover
❏
Seat: #53.02 Elongated Laurel molded wood
seat and cover
❏
Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (2") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A2.9.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
SUPPLY
AS
REQ'D.
237mm
(9-5/16)
768mm
(30-1/4)
25mm ± 6mm
(1 ± 1/4)
102m
m (4)
464mm
(18-1/4)
472mm
(18-9/16)
784mm
(30-7/8)
419mm
(16-1/2)
*203mm
(8)
305mm
(12)
356mm
(14)
213mm
(8-3/8)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
*352mm
(13-7/8)
*152mm
(6)
238mm
(9-3/8)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
08/07
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
