American Standard T038.900 - Manual
American Standard T038.900 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALL HANDLES
- Page 3 – EverCleanTM Finish Care Instructions; TESTING; SERVICE; CARE INSTRUCTIONS
- Page 4 – D E C K M O U N T; Installation; INSTALL HANDLE ADAPTER; w i t h; EverCleanTM Finish; EverClean Finish
- Page 5 – Be careful not to allow the HOSE
3/16" DRILLED
HOLE
5
T R O P I C T R I M K I T
D E C K M O U N T
T U B S Y S T E M S
Installation
Instructions
M 9 6 8 8 9 6
T 0 3 8 . 9 0 0
Certified to comply with ANSI A112.18.1
1
SPOUT INSTALLATION
U.S. Patent No. D403,750
FINISHED
DECK
REMOVE ALL
BURRS AND
BEVEL
TEMPLATE FOR
SPOUT ROLL
PIN LOCATION
3/16" DIA. HOLE
Drill with 3/16" bit
8.4mm
(21/64")
19.8mm
(23/32")
1"- 2"
FRONT
Complete FINISHED DECK before trim installation.
Turn off the water supplies.
Remove the GUARDS
(1)
from the VALVE BODIES
(2)
. Remove the
GUARD
(3)
and 1/4" PLUG
(4)
from the SPOUT SHANK
(5)
.
The SPOUT SHANK
(5)
height should be 1" to 2" above the FINISHED
DECK. Cut the SPOUT SHANK
(5)
if necessary.
Remove all burrs
and bevel the end of the shank. Failure to do so may damage
the SPOUT O-ring during installation and cause water leakage.
Drill a 3/16" hole in the finished deckfor spout locking pin. See
TEMPLATE for location.
18.6mm DIA.
(47/64")
SPOUT SHANK
3
4
5
1
1
2
Flat Blade Screwdriver
Adjustable Wrench
Channel Locks
Phillips Screwdriver
Required Tools
w i t h
EverClean™ Finish
Congratulations on purchasing your American Standard
faucet with EverClean finish found only on American
Standard faucets.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
M 9 6 8 8 9 6 1A SPOUT INSTALLATION 2 INSTALL HANDLE ADAPTERS Place the ESCUTCHEON SEALS (1) into groove of DECK ADAPTERS (2) . Align the HANDLE STEM (3) with the SLEEVE (4) as necessary. Thread the HANDLE ADAPTER (5) into the VALVE BODY (6) until the DECK ADAPTERS (2) contacts tight against the fin...
M 9 6 8 8 9 6 EverClean™ Finish Care Instructions American Standard’s EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with clean water may also be used, if desired. No additional cleaning products are required. DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cl...
T R O P I C D I V E R T E R & P E R S O N A L S H O W E R T R I M K I T S D E C K M O U N T T U B F I L L E R S Installation Instructions T 0 3 8 . 9 9 0 Certified to comply with ANSI A112.18.1U.S. Patent No. D403,750 1 INSTALL HANDLE ADAPTER Remove DIVERTER GUARD (1) from valve. Place the ESCUT...
