American Standard 8193.140 - Manual
American Standard 8193.140 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
L A K E L A N D ™ U N D E R C A B I N E T S T O R A G E R A C K
8 1 9 3 . 1 4 0
I n s t a l l a t i o n
I n s t r u c t i o n s
7 9 1 4 0 7 - 1 0 0
B E F O R E Y O U B E G I N :
IMPORTANT: DIMENSION OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN PERMITTED MANUFACTURING TOLERANCES.
© A M E R I C A N S T A N D A R D I N C . 2 0 0 5
™
• Carefully unpack your accessory, check the contents, and inspect carefully for damage.
R E C O M M E N D E D T O O L S & M A T E R I A L S :
• Locate the fixing screw holes on the underside of the sink.
• Make sure the threads are clear and mark around them. Fig 1.
• Regular Screwdriver (Small)
• Phillips Screwdriver
• Flash Light
• Pliers
• Tape Measure
• Masking Tape or Yellow Crayon
• Mounting Kit Consists Of:
• Put two clips on each of the top thick wires.
• Gently squeeze them closed.
• The exact location of the clips may vary depending on whether you want to position your storage rack
to the left or right. Fig 2 & 3.
Note: The top of the rack is manufactured with a slope. When it is correctly installed under the sink the bottom
of the rack will be parallel with the rim of the sink.
Thank you for selecting American-Standard...the benchmark of fine quality
for over 100 years. To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
• 4 Clips
• 2 Long and 2 Short Metric Machine Screws
• 10 Flat and 4 Anti-shake (star) washers. Fig 4.
2
1
Fig.1
Fixing Screw
Hole Locations
Fig.2
Fig.3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
