American Standard 7490.000 - Manual
American Standard 7490.000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
L63
© 2008 AS America Inc.
HERITAGE/AMARILIS
TWO-HANDLE CENTERSET BAR SINK FAUCET
WITH BRASS GOOSENECK SPOUT
GENERAL DESCRIPTION:
Durable brass construction. Amarilis 1/4 turn washerless
ceramic disc valve cartridges - reversible for use with either
lever or round handles. One-half inch male inlet shanks
with brass coupling nuts. Brass gooseneck swivel spout.
2.2gpm/8.3L/min. maximum flow rate.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges:
Assures a lifetime of
drip-free performance.
Solid Brass Construction:
Durable. Ideal for prolonged
contact with water.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Wide Selection of Handle Styles:
Full range of
interchangeable handle styles.
MODEL NUMBER:
7490.000 Centerset Bar Sink Faucet
Gooseneck swivel spout. Less handles.
Handles must be ordered separately.
SUGGESTED SPECIFICATION:
Centerset bar sink faucet shall be cast brass construction with all brass coupling nuts. Shall also feature 1/4 turn washerless
ceramic disc valve cartridges that are reversible for use with round or lever handles. Fitting shall be American Standard
Model # 7490.000.___ and handle kit # 0000.___.___.
To order
Less Handles - Specify: 4 digit style number followed by three zeros and 3 digit finish number.
Example 7490.000.002 = Bar Sink faucet in Polished Chrome finish.
7490.000
Product
Number
Description
Bar Sink faucet. Less handles.
Finish
Polished
Chrome
002
Handles must be ordered separately.
140mm
(5-1/2)
22mm
(7/8) DIA.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
51mm
(2)
29mm
(1-1/8)
MAX.
102mm
(4)
137mm
(5-3/8)
171mm
(6-3/4)
51mm
(2)
270mm
(10-5/8)
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
100
80
60
40
20
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
35mm - 38mm
(1-3/8" - 1-1/2")
DIA. MOUNTING
HOLES (2)
The above fittings will accept the following Amarilis-Series handles.
Lexington
902
912
Wrist
Blade
Lever
372H
372V
342H
342V
442
432
552
Metal
Lever
Perfume
Bottle
542
Metal
Lever
Metal
Cross
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
