American Standard 6067.121.002 - Manual

L201

© 2012 AS America Inc.

4/12

SELECTRONIC

™

FloWise

®

EXPOSED

1.28/1.1 GPF DUAL FLUSH TOILET FLUSH VALVE

HARDWIRED AC POWERED, SENSOR OPERATED

MODEL NUMBER:

❑

6067.721.002 HARD-WIRED AC POWERED:

Includes UL-approved Hard-Wired AC transformer
(electrical box by others). 11-1/2" rough-in

❑

6068.721.002 MULTI-AC POWERED:

Includes 10' extension cable. One transformer (sold
separately) can operate up to 15 faucets and/or
flush valves. 11-1/2" rough-in

OPERATING PRESSURE:

Overall Range: 20-125 psi**
Recommended: 25 psi (flowing)-80 psi (static)

FLOW REQUIREMENT:

25gpm (94.6 L/min.)
** Water pressure over 80 psi is not recommended
for most plumbing fixtures.

ACCESSORIES:
• Cast wall flanges (1" & 1-1/2")
• Solid ring pipe supports (2-1/2" & 6" C-E)
• Split ring pipe supports (2-1/2" & 6" C-E)

GENERAL DESCRIPTION:

Exposed, Hardwired AC Powered, Sensor Operated

Selectronic™ Water Closet Flush Valve for

floor-mounted or wall-hung 1-1/2" top spud bowls.
Inlet includes 1" I.P.S. angle stop with back-flow

protection, vandal-resistant cap, sweat solder kit,

cover tube and wall flange.
Outlet includes 1-1/2" vacuum breaker, spud coupling

and flange.

PRODUCT FEATURES:

• Light flush (1.1 gpf: 30% water savings) if user is in detec-

tion zone for 60 seconds or less

• Standard flush (1.28 gpf 20% water savings) if user is in

detection zone for more than 60 seconds

• Electronic flush valve with Selectronic™ proximity system

for “Hands Free” operation

• Includes UL approved hardwired AC transformer

• Input Voltage: 100 - 250 VAC, 50 / 60 Hz. Output Voltage:

6 VDC.

• Self-Cleaning Piston operation with integral wiper spring

prevents clogging and reduces maintenance

• Piston operation delivers superior flush accuracy and

repeatability

• Adjustable tailpiece

• Chemical resistant EPDM seals are unaffected by

chloramines and ammonia

• Valve remains closed and does not need to be reset after

loss of power or water pressure

• Fully Mechanical Manual Override Button can flush toilet

during a power outage

• Vandal-resistant metal cover plate (for 2-gang electric box

supplied by others) with no visible fasteners

• Sensor & electronic controls are fully enclosed and water

resistant

• Range can be adjusted manually or by remote control

• Sanitary Flush - Valve automatically flushes after 24

hours of non-use to clean fixture & maintain trap seal

• No external volume adjustment

• 5 second Arming Delay prevents unintentional flushing

• 3-second Flush Delay

• Can be installed left or right-handed

SUPPLY

DN 25mm

(1" I.P.S.)

115mm - 134mm

(4-1/2" - 5-1/4")

FINISHED WALL

FINISHED

FLOOR

57mm (2-1/4")-

137mm (5-3/8")

409mm

(16-1/8")

TYPICAL WATER CLOSET INSTALLATION:

AFWALL™ TOILET SHOWN

293mm

(11-1/2")

-C-L-

SEE ROUGH-IN

ON BACK

CRITICAL

LEVEL

COVER &

ELECTRICAL

BOX

160mm

(6-1/4")

86mm

(3-3/8")

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USABLE BUILDING FACILITIES-CHECK LOCAL CODES

RECOMMENDED SPECIFICATION:

Electronic proximity infrared sensor activated toilet flush valve shall feature self-cleaning piston valve. Includes a UL listed hardwired power

supply that provides 6 VDC power to run system. Flush volume is determined by amount of time user is in detection zone. 60 seconds or less:

1.1 gpf/4.2 Lpf. More than 60 seconds: 1.28 gpf/4.9 Lpf. Includes a fully mechanical manual over-ride that can provide a complete flush without

power.

Includes cast brass valve body and metal cover with chrome finish and vandal resistant stop cap. Angle stop with back-flow protection

and vacuum breaker included. Flush valve shall be American Standard Model # 606_.721.002.