American Standard 6055.204 - Manual

Page 2 - optional must be ordered separately; Key for vandal resistant aerator; UNPACKING

1 605XTMV 6055.202 6055.204 6055.205 PRODUCT No.s 6056.202 6056.204 6056.205 6057.202 6057.205 1 8 3 2 7 4 Mixing V alve Base P roduct How to or der the Selectr onic P roduct 1. Choose P o w er Suppl y 2. Choose Desir ed Spout • Single Hole Sink • Single Inlet • 1 and 3 Hole Sinks • Hot and C old In...

Page 3 - Roughing-in Dimensions; INSTALL SPOUT ASSEMBLY; INSTALLATION; CAUTION

TOOLS REQUIRED; Fig. 2 Fig. 2 Fig. 1 1 Channel Locks 2 Adjustable Wrench 3 Plumbers' Putty or Caulking 4 Phillips Screwdriver 5 Flat Blade Screwdriver 6 Electric Drill & 1/4" Drill Bit 7 Tape Measure 1 2 3 4 5 6 7 MOUNTING SURFACE Roughing-in Dimensions 10' GENERAL DESCRIPTION: Electronic fa...

Page 4 - Figure 2; For installations on drywall or tiled walls; CONNECT SPOUT HOSE TO

Fig. 2 1. Determine location of ENCLOSURE (1) . It must be located with-in the 14" (356mm) by 21" (533mm) shaded area shown in Figure 2 in order for electrical connections from the spout assembly to be made. NOTE: ENCLOSURE SUPPLY HOSE is 20". Distance between wall supply and ENCLOSURE (...

Page 5 - ELECTRICAL INSTALLATION

4 Fig. 1a Fig. 1b 1. Remove ENCLOSURE COVER (1) . Fig. 1. 2. Feed the WIRE CONNECTORS (2) through the top of ENCLOSURE (5) . Fig. 1a. 3. Remove GROMMET (4) from ENCLOSUR (5) . Fig.1. 4. Feed the gray SENSOR WIRE (7) through GROMMET (4) , 4" from CONNECTOR. Fig. 1b & 1d Insert gray SENSOR WIR...

Page 7 - RED

FOR AC-VERSION (MULTI HOOK-UP); Fig. 3, 4 Unit #1 Unit #2 Unit #3 1. See AC Version Electrical Hook-up for first unit of the Multi hook-up. 2. Remove ENCLOSURE COVERS from all ENCLOSURES. 3. Remove SOLID BLACK INSERT (1) from right side of ENCLOSURE #1 and replace with gray 2-PIECE GROMMET (3) . Rep...

Page 8 - MAINTENANCE; HAND WASH SENSOR OPERATION; HOW TO CHANGE SENSOR

MAINTENANCE When the Sensor detects a user, the water immediately starts to flow. Water flow will stop Two seconds after user is out of sensor range. The off delay allows the user to comfortably move his hands without the flow cycling on to off. As a precaution, a safety timer will turn off the wate...

Page 9 - HOW TO CLEAN AND REMOVE

CAUTION GENERAL CLEANING; Fig. 6 1. For general cleaning use a damp, soft cloth to clean the spout and the sensor. 2. For cleaning dirt use a soft cloth with diluted dish washing detergent. Wipe the area using a wet cloth and dry using a soft cloth. Do not scratch the sensor when cleaning. Avoid usi...

Page 11 - L AVAT O R Y FA U C E T S; PRODUCT NUMBERS

10 M 9 6 8 4 9 8 R e v. 1. 5 I N N S B R O O K w i t h S E L E C T R O N I C L AVAT O R Y FA U C E T S CHROME 002 Replace the "YYY" with appropriate finish code HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1 (800) 442-1902 Weekdays 8:00 a.m. to 8:00 p.m. E...

American Standard 6055.204 - Manual

Table of Contents:

Summary

Other American Standard Models