American Standard 6035 - Manual
American Standard 6035 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALL DIVERTER WITH SHOWER HEAD; Adjustable Wrench; Figure 3
- Page 3 – Removing spray for cleaning or changing spray location; If SPRAY UNIT (6) has too much tension on; Figure 1
- Page 4 – MODEL NUMBER
M 9 6 8 4 1 6 R E V 1 . 1
Certified to comply with ANSI A112.18.1M
6035
1
REMOVE EXISTING
SHOWER HEAD
2
INSTALL PIPE NIPPLE
Tools required for installation:
Adjustable Wrench
ROUGHING-IN DIMENSIONS
D e s i g n e r S h o w e r
M a s s a g e S y s t e m
8 A H J E 5 F =
™
I n s t a l l a t i o n
I n s t r u c t i o n s
Thank you for selecting American-Standard...the benchmark of
fine quality for over 100 years.
25-7/8"
4-3/8"
38-1/8"
3-5/8"
3"
8-5/8"
9-3/4"
UP AND DOWN
ADJUSTMENT
11-3/4 MAX."
6-1/4 MIN."
37-5/16"
MTG. HOLE
REFERENCE
10'
Level
Tape
Measure
5/16"
Drill Bit
Drill
Phillips Screwdriver
Using an adjustable wrench or channel
locks, remove the existing Shower Head,
Arm and Flange (1) by turning
counter-clockwise.
Figure 1.
Apply Teflon tape (provided) to the end of the PIPE NIPPLE (1).
Figure 2.
Thread PIPE NIPPLE (1) into elbow fitting, using adjustable wrench
and tighten. Then, using a hacksaw, cut off excess PIPE NIPPLE (1) at the 3rd
groove from the finished wall. Discard the excess pipe and remove any burrs and
debris from the nipple.
Figure 3
. Install O-RING (2) into groove next to finished wall. One extra
O-RING (2) is provided in parts bag.
1
1
EXCESS PIPE
NIPPLE
MAKE CUT AT 3rd
GROOVE FROM
FINISHED WALL
1
2
3
Figure 2
Figure 3
Teflon
Tape
FINISHED WALL
FINISHED
WALL
1/2" NPT
Figure 1
Hacksaw
Hacksaw
65" TO 78"
TO FINISHED FLOOR
(OPTIONAL)
Channel Locks
Channel Locks
Adjustable Wrench
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 4b 4a 3 INSTALL the 8 A H J E 5 F = ™ UNIT FOR THIN WALL INSTALLATIONS FOR TILE, CORIAN® OR MARBLE/GRANITE WALL INSTALLATIONS Note: For granite (Marble) wall Installations use of a hammer drill is suggested. INSTALL DIVERTER WITH SHOWER HEAD Adjustable Wrench SHOWER HEADREMOVED 3/16" CARBIDE D...
2 5 6 OPERATION 5 CONNECT FLEXIBLE HOSE TO DIVERTER 7 MAINTENANCE 9-3/4" UP AND DOWN TRAVEL OF UNIT Removing spray for cleaning or changing spray location Figure 1. Unscrew the TRIM RING (2) on the outside of the SPRAY HEADS (1) by twisting 1/8th of a turn counter-clockwise. Remove the O-RING (4...
MODEL NUMBER 6035 D e s i g n e r S h o w e rM a s s a g e S y s t e m 8 A H J E 5 F = ™ M962290-YYY0A SPRAY TRIM KIT M923106-0070A FRICTION CLIP M962292-0070AMOUNTING KIT - SCREWS (2) - ANCHOR (2)- TOGGLE ANCHOR (2)- DRILL BIT (1)- TEFLON TAPE (1) M923107-0070A PIPE NIPPLE M907526-YYY0A ESCUTCHEON ...
