American Standard 4251 - Manual
American Standard 4251 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALL HANDLES; FERRULE; MAKE WATER SUPPLY CONNECTIONS; TOP
- Page 3 – AERATO; NOTE: FAUCET can be installed with or without Hand Spray.
- Page 4 – MODEL NUMBER; B O T T O M M O U N T
Certified to comply with ASME A112.18.1M
Plumbers' Putty or Caulking
Adjustable Wrench
Channel Locks
TOOLS REQUIRED
1
INSTALL FAUCET
4
5
Install LOCK NUT (1) and RUBBER WASHER (2) onto SPOUT BODY (3).
Insert SPOUT BODY (3) through mounting hole from underside of SINK.
From under sink tighten LOCK NUT (1) to secure SPOUT BODY (3).
Make sure O-RING (6) is in place. Thread SPOUT ASSEMBLY (7) onto SPOUT
ESCUTCHEON (5) and hand tighten.
7
6
Place RUBBER RING (4) into SPOUT ESCUTCHEON (5) and thread ESCUTCHEON (5)
onto SPOUT BODY (3) until snug against internal stop.
2
1
3
Phillips Screwdriver
Flat Blade Screwdriver
by
C O L L E C T I O N
™
T H E
4251
Thank you for selecting American-Standard...the benchmark of
fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
B O T T O M M O U N T K I T C H E N F A U C E T
Turn off hot and cold water supplies before beginning.
CAUTION
I n s t a l l a t i o n
I n s t r u c t i o n s
M 9 6 8 4 1 2 A
Tubing Cutter
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 3 INSTALL HANDLES 1 3 2 FERRULE COUPLING NUT MAKE WATER SUPPLY CONNECTIONS Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE SUPPLIES (3)or 3/8"O.D. BULL-NOSE RISERS (2). Use adjustable wrench to tightenconnections. Do not over tighten. Be careful not to kink copper supply when ben...
5 6 TEST INSTALLED FAUCET INSTALL SPRAY HOLDER 7 Remove AERATOR. With handles in OFFposition, turn on water supplies and checkall connections for leaks. Operate both HANDLES to flush water linesthoroughly. Rotate SPOUT in both directions.Replace AERATOR. Place SPRAY HOLDER (1) into separate hole of ...
by C O L L E C T I O N ™ “ ” T H E 066070-YYY0A AERATOR M962265-YYY0A SPOUT KIT 073542-0070A SPOUT O-RING M962267-YYY0A SPOUT ESCUTCHEON 923012-0070A CLIP M962165-YYY0A LEVER HANDLE M953040-YYY0A SPRAY HOLDER M953667-YYY0A HANDSPRAY & HOSE A952026-0070A DIVERTER 060341-0070A SPRAY CAP M961634-00...
