American Standard 4101.350 - Manual
American Standard 4101.350 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MAKE WATER SUPPLY CONNECTIONS
- Page 3 – CHECK CONNECTIONS FOR LEAKS.; CHECK CONNECTIONS; CONNECT SPRAY HOSE AND INSTALL WEIGHTS
- Page 5 – K I T C H E N F A U C E T; ARCH; ESCUTCHEON KIT
M 9 6 8 5 8 4
H I - F L O W P U L L - O U T
K I T C H E N F A U C E T
Installation
Instr uctions
Certified to comply with ANSI A112.18.1M
1
INSTALL FAUCET WITH DECK ESCUTCHEON
(4101.351)
ARCH
ALIGN SLOT
AND TAB
ALIGN SLOT
AND TAB
SLOT
SLOT
TAB
TAB
Assemble RUBBER WASHER
(4)
, BRASS WASHER
(5)
, and threaded LOCKNUT
(6)
onto SHANK
(3)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(6)
and check that rotation of HANDLE
(7)
from HOT to COLD
is centered.
Assemble RUBBER WASHER
(4a)
, BRASS WASHER
(5a)
, and threaded LOCKNUT
(6a)
onto SHANK
(10)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(6a)
. Use a screwdriver to tighten SCREWS
(8a)
on LOCKNUT
(6a)
the same as fitting installation above.
Use a screwdriver to tighten SCREWS
(8)
on LOCKNUT
(6)
. Work your way around LOCKNUT
(6)
, tightening the
SCREWS
(8)
slightly each time until all are snug to ensure even pressure.
Align SOAP DISH
(11)
and push into place.
Installation with DECK ESCUTCHEON:
Apply a light bead of plumbers putty to underside of ESCUTCHEON
(1)
if
mounting surface is uneven.
Place ESCUTCHEON
(1)
onto sink or mounting surface with large opening
to the right as shown
.
Insert supply HOSES
(2)
and SHANK
(3)
through ESCUTCHEON
(1)
and mounting surface.
Make sure slot in fitting base aligns with tab on
ESCUTCHEON
(1). Figure 1.
Install SPOUT ASSEMBLY:
Insert HOSE
(9)
and SHANK
(10)
through ESCUTCHEON
(1)
and mounting surface.
Make sure slot in spout base aligns with tab on ESCUTCHEON
(1). Figure 2.
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
RECOMMENDED TOOLS
Adjustable Wrench
Regular Screwdriver
Phillips Screwdriver
Turn off water at
main supply.
CAUTION
Channel Locks
4
1
2
7
3
1
4a
5
5a
9
10
11
6
6a
8
8a
4101.350
4101.351
Figure 1
Figure 2
4101.351
4101.350
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
M 9 6 8 5 8 4 1a INSTALL FAUCET WITHOUT ESCUTCHEON PLATE(4101.115 with soap dish) (4101.350 less soap dish) Assemble RUBBER WASHER (5) , BRASS WASHER (6) and threaded LOCKNUT (7) onto SHANK (4) from underside of sink or mounting surface. Hand tighten LOCKNUT (7) and check that rotation of HANDLE (8)...
4 3 5 6 7 M 9 6 8 5 8 4 CHECK CONNECTIONS FOR LEAKS. Move HANDLE (1) down into "off" position. Turn on water supplies and check connections for leaks . CHECK CONNECTIONS FOR LEAKS 4 1 3 CONNECT SPRAY HOSE AND INSTALL WEIGHTS With PULL-OUT SPRAY (1) seated in SPOUT (2) , install WEIGHTS (3) o...
M 9 6 8 5 8 4 MODEL NUMBERS H I - F L O W P U L L - O U T K I T C H E N F A U C E T For toll-free information and answers to your questions, call: 1-800-442-1902 Weekdays 8:00 a.m. to 6:00 p.m. EST IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) Weekdays 8:00 a.m. to 7:00 p.m. EST IN MEXICO 01-800...
