American Standard 3311.028 - Manual
American Standard 3311.028 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
K42
© 2008 AS America Inc.
Revised 2/08
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
476mm
(18-3/4)
C/L OF SEAT POST HOLES
(140mm CENTERS)
(5-1/2)
381mm
(15)
768mm
(30-1/4)
229mm
(9)
25mm ± 6mm
(1 ± 1/4)
FINISHED WALL
159mm
(6-1/4)
C/L OF OUTLET
363mm
(14-1/2)
13mm
(1/2)
76mm
(3)
305mm
(12)
826mm
(32-1/2)
508mm
(20)
406mm
(16)
279mm
(11)
140mm
(5-1/2)
SUPPLY AS
REQUIRED
FINISHED
FLOOR
*
222mm
(8-3/4)
*
C/L
To Be Specified:
❏
Color:
❏
Seat: American Standard #5324.019 “Rise and
Shine” solid plastic closed front seat with cover.
❏
Alternate Seat: American Standard #5311.012
“Laurel” molded closed front seat with cover.
❏
Supply with stop:
REMINISCENCE™
ELONGATED TOILET
VITREOUS CHINA
REMINISCENCE™ ELONGATED TOILET
❑
2011.026
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl with
2" trapway
• AquaForce flushing technology
• Bowl rim height at 381mm (15")
• Vintage detailing on bowl and tank–design
matched to pedestal and countertop lavatories
• Side-mounted antique styled chrome trip lever
with ceramic handle insert
• 2 bolt caps
• Internal trapway area fully glazed
• 100% factory flush tested
❑
3311.028 Bowl
❑
4111.016 Tank
Nominal Dimensions:
768 x 508 x 826mm
(30-1/4" x 20" x 32-1/2")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Shown with
5311.012
“Laurel” seat
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
