American Standard 2907 - Manual
American Standard 2907 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALL TOILET SEAT; INSTALL TOILET; DO NOT OVERTIGHTEN NUTS; POSITION TOILET ON FLANGE; flange so bolts project through mounting holes.; BOLT CAP
- Page 3 – CARE AND CLEANING; tank. This damage can cause leakage and property damage.; Diagram 1; COMPACT CADET; FLAPPER; FLUIDMASTER; DESCRIPTION; GPF
- Page 4 – TROUBLESHOOTING GUIDE; PROBLEM; In the United States:; it is a signal you are wasting water because:
RECOMMENDED TOOLS AND MATERIALS
Putty Knife
Regular Screwdriver
Adjustable Wrench
Sealant
Tape Measure
Hacksaw
Wax Ring/Gasket
Flexible Supply Tube
Closet Bolts
Carpenters Level
1
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE:
If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE:
Mounting surface must be clean and level
before
new toilet is installed!
SAVE FOR FUTURE USE
3
2
CLOSET FLANGE
CLOSET BOLTS
7 3 0 1 2 7 0 - 1 0 0 R e v . D
A
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .
© A S A m e r i c a , I n c . 2 0 0 9
NOTE:
Pictures may not exactly define contour of china and components.
ANTIQUITY CADET® 3 - 1.6 GPF ONE-PIECE TOILET, MODEL 2907
COMPACT CADET® 3 - 1.6 GPF ONE-PIECE TOILET
COMPACT CADET® 3 FloWise™ - 1.28 GPF ONE-PIECE TOILET
ROUGHING-IN DIMENSIONS
NOTE:
Distance from wall to closet flange centerline must be as listed below:
4
INSTALL WAX SEAL
Invert toilet on floor (cushion to prevent damage), and install wax
ring evenly around waste flange (horn), with tapered end of ring
facing toilet. Apply a thin bead of sealant around toilet base.
WAX RING
SEALANT
Model 2568 – Compact Elongated Right Height™ with Seat
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure
your installation conforms to local codes.
!
INSTALL CLOSET BOLTS
Install closet bolts in flange channel, turn 90°, and slide
into place 6" (152 mm) apart and parallel to wall.
724mm
(28-1/2)
159mm
(6-1/4)
16 ± 6mm
(5/8 ± 1/4)
419mm
(16-1/2)
292mm
(11-1/2)
267mm
(10-1/2)
724mm
(28-1/2)
381mm
(15)
394mm
(15-1/2)
79mm
(3-1/8)
FINISHED WALL
422mm
(16-5/8)
305mm
(12)
C/L OF OUTLET
241mm
(9-1/2)
140mm
(5-1/2)
SUPPLY
AS
REQ'D
*
FINISHED
FLOOR
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTERS
276mm
(10-7/8)
360mm
(14-3/16)
235mm
(9-1/4)
419mm
(16-1/2)
462mm
(18-3/16)
C/L OF SEAT POST
HOLES 140mm
(5-1/2) CENTERS
INSTALLATION INSTRUCTIONS
COMPACT CADET 3
ANTIQUITY CADET 3
C/L OF OUTLET
C/L OF SUPPLY
AS REQUIRED
FINISHED WALL
FINISHED
FLOOR
737mm
(29")
225mm
(8-7/8")
(5
")
714mm
(28-1/8")
127mm
83mm
(3-1/4")
12.7mm
(1/2")
305mm
(12")
457mm
(18")
C/L
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
7 3 0 1 2 7 0 - 1 0 0 R e v . D 7 INSTALL TOILET SEAT Install toilet seat in accordance with manufacturer's directions. - 2 - 8a 8b Before continuing, determine the type of water supply connecation you have from the chart below and use the appropriate assembly parts required to properly reconnect th...
7 3 0 1 2 7 0 - 1 0 0 R e v . D 9 10 ADJUSTMENTS a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup. See Step 10 for water level adjustment method. b. If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the be...
7 3 0 1 2 7 0 - 1 0 0 R e v . D 12 TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Does not flush a. Water supply valve closed. a. Open valve and allow water to fill tank. b. Supply line blocked. b. Shut off water supply, disconnect supply line, and inspect all gaskets and washers. Re...
