American Standard 2881S - Manual
American Standard 2881S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C47
© 2008 AS America Inc.
Standard
®
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
WITH BRASS SPOUT
GENERAL DESCRIPTION:
Cast brass valve bodies with flexible hose connections for
6" to 12" (152mm to 305mm) installations. 1/4 turn
washerless ceramic disc valve cartridges. Cast brass
spout. Genuine porcelain lever handles. One-half inch
male inlet shanks. All brass drain body with 1-1/4" (32mm)
tailpiece.
1.5 gpm/5.7L/min. maximum flow rate.
PRODUCT FEATURES:
Brass Construction:
Durable. Easy to clean, seamless
design. Ideal for prolonged contact with water. Provides the
finest surface for application of colors and finishes.
Ceramic Disc Valve Cartridges:
Assures a lifetime of
smooth handle operation and drip-free performance.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Genuine Porcelain Handles
Exclusive Handle Alignment System:
Allows fine
tuning of handle position.
Choice of Finishes
MODEL NUMBER:
2881 Widespread Lavatory
Pop-up drain. Porcelain Lever handles.
Polished Chrome finish.
2881S Widespread Lavatory
Pop-up drain. Porcelain Lever handles.
Satin Nickel finish.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with flexible hose connections for 6" to 12"
installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model
#2881.__.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
2881
Lavatory faucet with pop-up drain. Porcelain Lever handles. Polished Chrome finish.
2881S
Lavatory faucet with pop-up drain. Porcelain Lever handles. Satin Nickel finish.
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
2881 Shown
MOUNTING
SURFACE
2-1/2D.
3-1/2"
125mm
(4-7/8")
105mm
(4-1/8")
64mm
(2-1/2)
DIA.
152mm - 305mm
(6 TO 12)
FLEXIBLE
29mm
(1-1/8)
DIA.
89mm
(3-1/2)
38mm
(1-1/2)
MAX.
FLEXIBLE
HOSE
FLEXIBLE
HOSE
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
35mm
(1-3/8)DIA.
MOUNTING
HOLES
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
100
80
60
40
20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
