American Standard 2388.012 - Manual
American Standard 2388.012 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
K96
© 2008 AS America Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
229mm
(9)
19mm ± 6mm
(3/4 ± 1/4)
305mm
(12)
711mm
(28)
C/L OF OUTLET
8
3
m
m
(3
-1
/4
)
FINISHED WALL
381mm
(15)
419mm
(16-1/2)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
308mm
(12-1/8)
159mm
(6-1/4)
16mm
(5/8)
FINISHED
FLOOR
743mm
(29-1/4)
235mm
(9-1/4)
152mm
(6)
508mm
(20)
203mm
(8)
SUPPLY
AS
REQ'D
365mm
(14-3/8)
*
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Seat: American Standard #5322.011 “Rise and
Shine” solid plastic closed front seat with cover.
❏
Seat: American Standard #5308.014 “Laurel”
molded closed front seat with cover.
❏
Alternate Seat:
❏
Supply with stop:
COLONY™
ROUND FRONT TOILET
VITREOUS CHINA
COLONY™ ROUND FRONT TOILET
❑
2388.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
❑
3338.012
Bowl
❑
4392.016
Tank
Nominal Dimensions:
711 x 508 x 743mm
(28" x 20" x 29-1/4")
Fixture only, seat and supply by others
Alternate Tank Configurations Available:
❑
4392.500
Tank complete with Aquaguard Liner
❑
4392.800
Tank complete with trip lever located
on right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
