American Standard 2384.012 - Manual
American Standard 2384.012 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
K67
Revised 2/08
© 2008 AS America Inc.
CADET
®
3 ROUND FRONT
ROUGH-IN TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
CADET
®
3 ROUND FRONT TOILET
❑
2384.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Features the
Cadet
®
3 Flushing System
• Space saving round front siphon action
jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect
®
tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 100% factory flush tested
• 5 year warranty
❑
3011.016
Round Front Bowl
❑
4021.016
Tank
Nominal Dimensions:
718 x 438 x 733mm (28-1/4" x 17-1/4" x 28-7/8")
Fixture only, seat and supply by others
Alternative Tank Configurations Available:
❑
4021.500
Tank complete with Aquaguard Liner
❑
4021.600
Tank complete with tank cover
locking device
❑
4021.700
Tank complete with Aquaguard Liner
and tank cover locking device
❑
4021.800
Tank complete with trip lever located
on right side
❑
4021.900
Tank complete with tank cover locking
device and trip lever located on right side
❑
4021.950
Tank complete with Aquaguard liner,
tank cover locking devise, and trip lever on
right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Silver
❏
Linen
❏
Black
❏
Seat: #5330.010 Round front Champion
®
Slow Close
solid plastic seat and cover with easy lift off feature
❏
Seat: #5282.011 Round Front EverClean
®
solid
plastic seat and cover
❏
Seat: #5320.110 EverClean
®
Round Front Seat with
Slow Close Snap-Off Hinges
❏
Supply with stop:
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
