American Standard 2035.212 - Manual
American Standard 2035.212 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
K28
© 2006 American Standard Inc.
CHAMPION
®
SELECT
ROUND FRONT TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT
: Dimensions of fi xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
FINISHED WALL
19mm ± 6mm
(1 ± 1/4)
387mm
(15-1/4)
FINISHED
FLOOR
305mm
(12)
721mm
(28-3/8)
C/L OF OUTLET
83mm
(3-1/4)
216mm
(8-1/2)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
362mm
(14-1/4)
264mm
(10-3/8)
16mm
(5/8)
841mm
(33-1/8)
489mm
(19-1/4)
SUPPLY
AS
REQ'D
254mm
(10)
152mm
(6)
254mm
(10)
356mm
(14)
*
To Be Specifi ed:
❏
Color:
❏
White
❏
Bone
❏
Silver
❏
Linen
❏
Black
❏
Seat: (please specify color)
❏
Champion
®
Slow Close Round Front #5330.010
❏
Rise & Shine Round Front #5322.011
❏
Laurel Round Front #5308.014
❏
Supply with stop:
Revised 5/06
CHAMPION
®
SELECT ROUND FRONT TOILET
❑
2035.212
• Vitreous china
• EverClean™ anti-microbial glaze
(available Summer 2006)
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features
Champion® Flushing System
performance platform
• 3" non-adjustable, fl apper-free fl ush valve
• Round Front siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank /bowl coupling system
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory fl ush tested
• 2 bolt caps
• 10 year warranty
❑
3110.016
Round Front Bowl
❑
4272.216
Tank
Nominal Dimensions:
721 x 489 x 841mm
(28-3/8" x 19-1/4" x 33-1/8")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specifi cation for
Non-Adjustability - July, 2003 revision
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
