American Standard 192 - Manual
American Standard 192 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – optional must be ordered separately; UNPACKING; vandal resistant aerator.
- Page 3 – Roughing-in Dimensions; INSTALLATION; INSTALL SPOUT ASSEMBLY; CAUTION; ADA Compliant; Note: All plumbing and electrical wiring must be
- Page 4 – Figure 2; For installations on drywall or tiled walls; CONNECT SPOUT HOSE TO
- Page 5 – ELECTRICAL INSTALLATION; Contractor to supply ELECTRICAL BOX (12)
- Page 7 – MAINTENANCE; HAND WASH SENSOR OPERATION; DETECTION; HOW TO CLEAN AND REMOVE
(In Toronto Area only: 1-905-3061093)
To learn more about American Standard Faucets visit our website at:
www.us.amstd.com
or U.S.
customer's e-mail us at:
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
NOTE TO INSTALLER: Please give this manual to the customer after installation.
(In Toronto Area only: 1-905-3061093)
Installation Instr
uctions
In
s
ta
ll
a
ti
o
n
I
n
s
tr
u
c
ti
o
n
s
© 2007 American Standard
Certified to comply with ASME A112.18.1M
M965274
2506.192, 2506.195
SELECTRONIC®
Hard-Wired AC Powered Moments
Lavatory Proximity Faucet
PRODUCT NUMBERS
Product No.'s & Options
Specifications
How to Install
Electrical Hook-up
Maintenance
FAQ,s
Replacement Parts
1
2
2-3
4-5
6-7
8
9
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 1 9 3 2 8 4 Mixing V alve Base P roduct 6. Circuit board 7. 10 ft. Extension Wire (for 2506.175/172 series)8. Mixing Valve ( optional must be ordered separately ) 9. Key for vandal resistant aerator Installation Instructions 1. Selectronic Spout Assembly2. Mounting Kit3. Electrical Enclosure4. Sup...
TOOLS REQUIRED; Fig. 2 Fig. 2 Fig. 1 1 Channel Locks 2 Adjustable Wrench 3 Plumbers' Putty or Caulking 4 Phillips Screwdriver 5 Flat Blade Screwdriver 6 Electric Drill & 1/4" Drill Bit 7 Tape Measure 1 2 3 4 5 6 7 Roughing-in Dimensions 10' INSTALLATION 2 114mm (4-1/2) 500mm (20) 381mm (15) ...
Fig. 2 1. Determine location of ENCLOSURE (1) . It must be located with-in the 14" (356mm) by 21" (533mm) shaded area shown in Figure 2 in order for electrical connections from the spout assembly to be made. NOTE: ENCLOSURE SUPPLY HOSE is 20". Distance between wall supply and ENCLOSURE (...
