American Standard 0780.800 - Manual
American Standard 0780.800 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
J3
BARRIER FREE
© 2008 AS America Inc.
TOWN SQUARE
®
27"
PEDESTAL SINK
FIRECLAY
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Silver
❏
Black
❏
Town Square Faucet:
❏
Centerset Lavatory Faucet: 2555.201
❏
Widespread Lavatory Faucet: 2555.801
(shown)
❏
Other Lavatory Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■
FOR REINFORCEMENT ONLY. TAKE ACTUAL DIMENSIONS FROM
FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
1-1/4" O.D.
WASTE
*
24"
(610mm)
*
22"
(559mm)
SUPPLIES AS
REQUIRED
6"
(152mm)
DRAIN
CHASE
OPEN
TO
FLOOR
9-5/8"
(244mm)
21-1/4"
(540mm)
27"
(686mm)
FINISHED WALL
FINISHED
FLOOR
1-3/4" DIA.
STD. DRAIN
OUTLET
4"
(102mm)
20-1/4" (514mm)
2-5/8"
(67mm)
4"
(102mm)
5/8"
(16mm)
PED BASE
OUTLINE
PED TOP
OUTLINE
36"
(914mm)
28"
(711mm)
3-3/4" (95mm)
8"
(203mm)
6"
(152mm)
10"
(254mm)
1-1/4" O.D.
TAILPIECE
3/8" (10mm) DIA.
BASE ANCHOR
SCREW HOLES
ON 6" (152mm)
CTRS
3/8" (10mm) DIA.
SLAB ANCHOR
SCREW HOLES
ON 20-1/4" (514mm)
CTRS
TOWN SQUARE
®
27" PEDESTAL SINK
• American classic design
• Clean straight lines with classic ogee curves
• Rear overflow
• Supplied with mounting kit
•
Design-matched to Town Square
®
fixture and faucets
• Right Height™ for greater comfort during use
• Made from fireclay
❏
0780.400 Faucet holes on 4" (102mm) centers
❏
0780.800 Faucet holes on 8" (203mm) centers
❏
0780.100 Center hole only
Nominal Dimensions:
27" x 21-1/4" x 36"
(686 x 540 x 914mm)
Separate Components:
❏
0780.004 Pedestal top 4" (102mm) centers
❏
0780.008 Pedestal top 8" (203mm) centers
❏
0780.001 Center hole only
❏
0031.000 Pedestal only
Bowl sizes:
15" (381mm) wide
12-1/2 (318mm) front to back
6-1/2" (165mm) deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous Ceramic Fixtures
• CAN/CSA B45 Series
Revised 2/08
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
