American Standard 0700.001 - Manual
American Standard 0700.001 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
J27
BARRIER FREE
© 2008 AS America Inc.
TOWN SQUARE
®
COUNTERTOP SINK
FIRECLAY
TOWN SQUARE
®
COUNTERTOP SINK
• American classic design
• Clean, straight lines with classic ogee curves
• Tapered interior bowl with flat bottom design
provides dramatic look
• Made from fine fireclay
• Self-rimming with cutout template supplied
• Front overflow
❏
0700.004
Faucet holes on 4" (203mm) centers
(illustrated)
❏
0700.008
Faucet holes on 8" (102mm) centers
❏
0700.001
Center hole only
Nominal Dimensions:
23-1/8" x 18-3/4"
(587 x 476mm)
Bowl sizes:
18-1/2" (470mm) wide
10-1/2" (267mm) front to back
6-1/4" (159mm) deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 series
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Black
❏
Town Square Faucet:
❏
Centerset Sink Faucet: 2555.201 (shown)
❏
Widespread Sink Faucet: 2555.801
❏
Other Sink Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Revised 2/08
4"
(102mm)
9-3/4"
(248mm)
18-3/4"
(476mm)
23-1/8"
(587mm)
FINISHED WALL
OR SPLASHBACK
8"
(203mm)
31"
(787mm)
SUGGESTED
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
*
10-3/4"
(273mm)
*
12-7/8"
(327mm)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
1"
(25mm)
8-1/8"
(206mm)
OPTIONAL
SUPPLIES
AS REQ'D
1-3/4" DIA.
STD. DRAIN
OUTLET
2-7/8"
(73mm)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
