American Standard 065.525 - Manual
American Standard 065.525 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – UNPACKING; DO NOT REMOVE PROTECTIVE FILM FROM SENSOR; CLOTH WITH A COARSE SURFACE.; Installation InstructionsIn
- Page 3 – PRIOR TO INSTALLATION; Prior to installing the SelectronicTMFlush Valve; See Step 4; and debris can cause flush valve to run continuously.; Roughing-in Dimensions; Right or Left Hand Installation; Exposed Flushometer; See; In
- Page 4 – CAUTION; Install Optional Sweat Solder Adapter
- Page 6 – To avoid overflowing, the SUPPLY STOP; NOTE: Stand outside of sensor detection aera.; Do not use lubricants (other than water)
- Page 8 – The detection distance is preset and is ideal for; Stand outside of sensor detection aera.
- Page 9 – UNIT WILL ONLY FLUSH MANUALLY; SEE STEP 10, page 6 in manual; UNIT IS CONTINUOUSLY FLUSHING; SEE STEP 10, page 6 in manual; TROUBLESHOOTING FLOW CHARTS; UNIT DOES NOT FLUSH AT ALL
- Page 10 – PRODUCT NUMBERS; S E L E C T R O N I C TM
Installation InstructionsIn
s
t
a
ll
a
t
io
n
I
n
s
t
r
u
c
t
io
n
s
(In Toronto Area only: 1-905-3061093)
Certified to comply with ASME A112.19.2M
© 2008 AS America, Inc.
NOTE TO INSTALLER: Please give this manual to the customer after installation.
SELECTRONIC™
PROXIMITY TOILET FLUSH VALVE
1.28 & 1.6 GPF
Exposed Flushometer
for 1-1/2
"
Top Spud Bowls
CLOG RESISTANT
• Self-cleaning piston valve prevents clogging and reduces maintenance.
ONE SENSOR FITS ALL
• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.
• Range can be adjusted manually or with optional remote control.
• Sensor Features Low Battery Indicator.
M968699 Rev.1.3
6065.161
6065.121
6065.565
MODEL NUMBERS
6065.162
6065.122
6065.525
CLOG RESISTANT
• Self-cleaning piston valve prevents clogging and reduces maintenance.
ONE SENSOR FITS ALL
• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.
• Range can be adjusted manually or with optional remote control.
• Sensor Features Low Battery Indicator.
To learn more about American Standard Faucets visit our website at:
www.americanstandard-us.com
or U.S. customer's e-mail us at:
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-3061093)
In
s
t
a
ll
a
t
io
n
I
n
s
t
r
u
c
t
io
n
s
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
In s t a ll a t io n I n s t r u c t io n s 5. Sweat Solder Adapter 6. Cover Tube7. Wall Escutcheon8. Supply Stop9. Installation Instructions 1. Flush Valve Assembly2. Down Tube and Vacuum Breaker3. Spud Coupling Nut and Washers4. Spud Flange All American Standard Products Are Water Tested At Our Fa...
In s t a ll a t io n I n s t r u c t io n s RECOMMENDED TOOLS; Fig. 2 Fig. 2 1.2.3.4.5.6.7.8.9. 10. Teflon Tape Flat Blade ScrewdriverAdjustable Wrench Tape Measure HacksawTubing CutterFileFor Sweat Connection; Solder and Torch2.5mm Hex Wrench1.5mm Hex Wrench 1 2 3 4 5 6 7 9 10 8 PRIOR TO INSTALLATI...
In s t a ll a t io n I n s t r u c t io n s 1 1 2 3 4 5 1 4 2 3 Fig. 4 Fig. 5 1. Measure from finished wall to first thread of Adapter or threaded supply pipe (dimension “X”). Cut COVER TUBE (1) to length (X). Apply Teflon Tape to the threaded end of the Adapter or supply pipe. Fig. 4a. 2. Push the ...
