Amana W10150612A - Manual

Amana W10150612A

Amana W10150612A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 2 – INSTALLATION INSTRUCTIONS; Tools and Parts; Location Requirements; You will need; WARNING; Explosion Hazard
  • Page 3 – Companion appliance spacing should also be considered.; Mobile Home - Additional Installation Requirements; To contact a qualified electrical installer.
  • Page 4 – Electrical Connection; If using a power supply cord:; A UL listed strain relief.; If your outlet looks like this:; GROUNDING INSTRUCTIONS; For a permanently connected dryer:
  • Page 5 – Electrical Requirements - Canada; It is your responsibility; Electrical Shock Hazard; Improper connection of the equipment-
  • Page 6 – Remove the screws from a; Power Supply Cord
  • Page 7 – Style 2: Direct wire strain relief; of electrical connection:; Electrical Connection Options; *If local codes do not permit the connection of a cabinet-ground; Go to Section; Power supply cord
  • Page 8 – Connect ground wire (green or bare) of power supply cord to; external ground conductor screw. Tighten screw.; Connect the other wires to outer terminal block screws.; “Venting Requirements.”
  • Page 9 – Connect ground wire (green or bare) of power supply cable to; Place the hooked ends of the other power supply cable wires; Connect the other wires to outer terminal block screws.
  • Page 10 – Optional 3-wire connection; ground conductor screw to an adequate ground.
  • Page 11 – Venting Requirements; To reduce the risk of fire, this dryer MUST BE; If using an existing vent system; Use a heavy metal vent. Do not use plastic or metal foil vent.; Rigid metal vent; 5° elbows provide better airflow than 90° elbows.; Clamps; Use clamps to seal all joints.; Exhaust; Recommended hood styles are shown here.; Fire Hazard
  • Page 12 – Do not use an exhaust hood with a magnetic latch.; Plan Vent System; Choose your exhaust installation type; Special provisions for mobile home installations; Determine vent path; Bend vent gradually to avoid kinking.; Housecleaning problems and health problems.
  • Page 13 – Shorten the life of the dryer.; Vent system chart; Install Vent System; wall opening around exhaust hood.; Install Leveling Legs; Excessive Weight Hazard
  • Page 14 – the bottom of the hinge.
  • Page 15 – Complete Installation
  • Page 16 – INSTRUCTIONS POUR L’INSTALLATION DE LA SÉCHEUSE; SÉCURITÉ DE LA SÉCHEUSE; Outillage et pièces; Votre sécurité et celle des autres est très importante.; AVERTISSEMENT; Voici le symbole d’alerte de sécurité.
  • Page 17 – Exigences d’emplacement; On a besoin de; Un circuit séparé de 30 ampères.; Dégagements de séparation à respecter; *La plupart des installations requièrent un espace minimum de
  • Page 18 – L’installation dans une maison mobile exige :; Spécifications électriques- Canada; C’est à l’utilisateur qu’incombe la responsabilité de; Communiquer avec un électricien qualifié.; Risque de choc électrique; Pour une sécheuse reliée à la terre et connectée par; INSTRUCTIONS DE LIAISON À LA TERRE; Le raccordement incorrect de
  • Page 19 – Exigences concernant l'évacuation; En cas d'utilisation du système d'évacuation existant; Conduit métallique rigide; Utiliser des brides pour sceller tous les joints.; Évacuation; Les styles de clapets recommandés sont illustrés ci-dessous.; Risque d’incendie
  • Page 20 – Le clapet incliné de type boîte ci-dessous est acceptable.; Planification du système d’évacuation; Choisir un type de système d’évacuation
  • Page 21 – Déterminer l'itinéraire d'acheminement du conduit; Plier le conduit graduellement pour éviter de le déformer.; Installation du système d’évacuation; Risque du poids excessif
  • Page 22 – ni déformer le conduit d’évacuation.; Inversion du sens d'ouverture de la porte; Grande porte réversible à pivotement latéral
  • Page 23 – Achever l’installation; le conduit d’évacuation n’est pas écrasé ou déformé.
Loading the manual

29" (73.7 CM) ELECTRIC DRYER

INSTALLATION INSTRUCTIONS

INSTRUCTIONS POUR L’INSTALLATION DE LA SÉCHEUSE

ÉLECTRIQUE DE 29" (73,7 CM)

Para obtener acceso al manual de uso y cuidado en español, o para obtener información adicional acerca de su producto, visite:
www.whirlpool.com.

Tenga listo su número de modelo completo. Puede encontrar el número de modelo y de serie dentro de la cavidad superior de la
puerta.

DRYER SAFETY

Table of Contents / Table des matières

DRYER SAFETY ............................................... 1

INSTALLATION INSTRUCTIONS.................... 2

Tools and Parts ............................................. 2
Location Requirements ................................ 2
Electrical Requirements - U.S.A. .................. 3
Electrical Requirements - Canada ................ 5
Electrical Connection - U.S.A. Only .............. 6
Venting Requirements................................. 11
Plan Vent System ........................................ 12
Install Vent System...................................... 13
Install Leveling Legs .................................... 13
Level Dryer .................................................. 13
Connect Vent............................................... 13
Reverse Door Swing (Optional)................... 14
Complete Installation .................................. 15

SÉCURITÉ DE LA SÉCHEUSE ......................16

INSTRUCTIONS D’INSTALLATION...............16

Outillage et pièces .......................................16
Exigences d’emplacement ..........................17
Spécifications électriques- Canada.............18
Exigences concernant l'évacuation .............19
Planification du système d’évacuation ........20
Installation du système d’évacuation ..........21
Installation des pieds de nivellement...........21
Mise à niveau de la sécheuse......................22
Raccordement du conduit d’évacuation .....22
Inversion du sens d'ouverture de la
porte (facultatif) ............................................22
Achever l’installation ....................................23

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

W10150612A

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INSTALLATION INSTRUCTIONS; Tools and Parts; Location Requirements; You will need; WARNING; Explosion Hazard

2 INSTALLATION INSTRUCTIONS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Parts supplied: Remove parts package from dryer drum. Check that all parts were included. 4 leveling legs Parts needed: ...

Page 3 - Companion appliance spacing should also be considered.; Mobile Home - Additional Installation Requirements; To contact a qualified electrical installer.

3 Installation Clearances The location must be large enough to allow the dryer door to open fully. Dryer Dimensions *Most installations require a minimum 5" (12.7 cm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements.” Installation spacing for recessed area or...

Page 4 - Electrical Connection; If using a power supply cord:; A UL listed strain relief.; If your outlet looks like this:; GROUNDING INSTRUCTIONS; For a permanently connected dryer:

4 Electrical Connection To properly install your dryer, you must determine the type of electrical connection you will be using and follow the instructions provided for it here. ■ If local codes do not permit the connection of a neutral ground wire to the neutral wire, see “Optional 3-wire connection...

Other Amana Models