Amana RCB- User Manual
Amana RCB– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Units Without A Discharge Tube Port; CAUTION; Description; WARNING; Units Without A High Pressure Control
- Page 3 – Units With A High Pressure Control; Wiring
- Page 4 – Servicer’s Note; Disconnect the electrical power
Amana
Fayetteville, TN 37334
!
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to
know the product better than the customer. This
includes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize
yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during installation
or repair it is possible to place yourself in a position
which is more hazardous than when the unit is in
operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct
a customer in its safe use.
Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual should
not supersede existing practices but should be
considered as supplemental information.
®
10664125
August 1999
Table of Contents
ATTENTION INSTALLING PERSONNEL ............. 1
Description ............................................................ 2
Bill of Material .......................................................
2
Installation .............................................................
2
Units Without A High Pressure Control ............................
2
Units With A High Pressure Control ................................
3
Wiring ..................................................................... 3
Servicer’s Note ...................................................... 4
Low Ambient Control LAC02A
LAC02A
Low Ambient Control
Installation Instructions
Available at Surplus Sales
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 2. Remove and save the control box cover. 3. Remove and save the screws holding the control box in place. Carefully swing the control box about 90°counterclockwise. 4. Remove and discard the cap from the discharge line access fitting. 5. Place a teflon seal in the fitting of the low ambient contro...
3 10. Carefully replace the service valve panel and screws. Carefully swing the control box clockwise to it’soriginal position. Reattach it using the screws re-moved earlier. Units With A High Pressure Control 1. Remove and save the screws holding the control box cover in place. 2. Remove and save t...
4 Servicer’s Note CAUTION Avoid servicing the low ambient controlwhile the unit is operating. The rotatingfan blades could cause serious injury. If measurement of the high side pressure is required, usethe liquid line valve on the outside of the unit. Also notethat most electrical measurements for t...
