Altec Lansing IMT800 - Manual

3 en Package Contents AC adapter Clip-on remote Two 3.5 mm stereo cables Altec Lansing Mix speaker system Miscellaneous adapters for iPhone and iPod

4 Getting Started How to install the Ac Adapter 1 Connect the AC adapter cable plug into the speaker system’s jack. The jack is located on the back of the system. 2 Plug the AC adapter into the wall outlet. How to install the Speaker Batteries Your Altec Lansing Mix speaker system can also be powere...

5 en Placing and Removing Adapters for the iPhone and iPod Your Altec Lansing Mix speaker system includes removable adapters for today’s popular iPhone and iPod models. These adapters ensure that your iPhone and iPod properly fit in the speaker system’s dock. As new iPhone and iPod models are introd...

6 Speaker Features and Indicators Universal docking station for iPhone or iPod Guard for iPhone or iPod LCD display Battery indicator FM stereo indicator Source button Track forward button EQ button AC adapter jack Two AUX jacks FM antenna Power/volume increase/ volume decrease knob Track back butto...

7 en Speaker Controls Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started section for more information. Press the knob. Turn off your speaker system Press the knob. Whenever you are finished using your speaker system, please...

9 en Clip-On Remote Features The clip-on remote lets you operate many functions of your Altec Lansing Mix speaker system: Turn on your speaker system Press the button. Turn off your speaker system Press the button. Change audio source Press the “SOURCE” button to cycle through and select the audio s...

11 en Listening to Your iPhone or iPod 1 Dock your iPhone or iPod in the Altec Lansing Mix speaker system. Make sure the correct adapter for iPhone or iPod is inserted in the speaker system’s dock. Slide the guard down to protect the iPhone or iPod. 2 Select “iPod” mode. Press the “SOURCE” button on...

13 en Setting eQ Controls How to Set the Bass and Treble control Using the onboard controls 1 Access the bass and treble settings. Press the “EQ” button once. The Bass Control screen will appear on the LCD. 2 Increase or decrease the bass level. Rotate the knob. 3 enter the Treble Control screen. Pr...

15 en Whenever your iPhone or iPod is docked and your Altec Lansing inMotion Max speaker system is plugged into an AC outlet, your iPhone or iPod is charging (until fully charged) – even if the speaker system is switched off. Listening to the FM Radio 1 extend the FM antenna fully for best FM recept...

17 en Whenever you turn on your Altec Lansing Mix speaker system, the Altec Lansing logo will appear for approximately 3 seconds followed by a personalized message, if you’ve set one. The Mix comes with no preset power-on message. To create a personalized message, just follow these instructions: 1 e...

18 Troubleshooting Symptom Possible Problem Solution Speaker system doesn’t respond (no power) AC adapter isn’t plugged into a wall outlet or the connector isn’t plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector into th...

21 en ALTec LANSiNG oNe-YeAr LiMiTeD wArrANTYwhat Does the warranty cover? Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below. what is the Period of coverage? This warranty runs for one year from the date of purchase. The...