Alpine TME-S370 - Manual - manualsarea.com

Page 2 - IMPORTANT

SERIAL NUMBER:INSTALLATION DATE:INSTALLATION TECHNICIAN:PLACE OF PURCHASE: IMPORTANT Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit. 290533_TME370_r13.indb ii 290533_TME370_r13.i...

Page 3 - Operating Instructions; WARNING; Warning; Getting Started; DVD Video Player Operation; Setup

1 -EN ENGLISH Contents Operating Instructions WARNING Warning ....................................... 2 Caution ........................................ 2 Precautions ................................. 3 Getting Started Location of Controls........................... 4 Turning Power On and Off .........

Page 4 - DO NOT DISASSEMBLE OR ALTER.; Failure to do so may result in fi re or electric shock.; CAUTION; HALT USE IMMEDIATELY IF A PROBLEM APPEARS.; DO NOT WATCH VIDEO WHILE DRIVING.

2 -EN DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fi re or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fi re, etc. KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN....

Page 5 - PRECAUTIONS; Product Cleaning

3 -EN PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. Temperature Be sure the temperature inside the vehicle is betwe...

Page 6 - POWER; Adjusting the Volume and Mute

4 -EN Location of Controls 1 2 3 4 5 6 7 8 1 Remote IR Receiver The IR receiver receives the remote IR command from the remote controller of connected devices. 2 Ambient Light Sensor Changes the LCD backlight and the soft-touch key backlit automatically, when the surrounding brightness changes. 3 Vo...

Page 7 - Switching the Source; Touch the desired source on Source; Rearview Camera

5 -EN Switching the Source 1 Touch the desired source on Source Select screen. 4 1 2 3 1 AUX The AUX Input screen is displayed. • The name given as the source name in “Source Name” under AUX Setup Operation on page 12 is displayed. • Refer to the section titled “Auxiliary Device Operation” on page 6...

Page 8 - Page Change

6 -EN Auxiliary DeviceOperation If an ALPINE device is connected to AUX, the device is controllable from the unit. This section explains how to operate representative devices. This operation cannot be performed while the vehicle is in motion. In order to display AUX input, enable lock-out function. ...

Page 9 - Source

7 -EN • The selected subtitle language becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that language, the disc's default language is selected instead. • For some discs, the subtitles will be displayed even when this is set to off. B...

Page 10 - Menu Control Screen

8 -EN DVB-T Operation (Optional Europe Only) Operable when optional Alpine DVB-T is connected. When DVB-T is selected in "Source Name" under AUX Setup Operation (page 12), the DVB-T is displayed in Source Select screen.Refer to owner's manual of DVB-T for details. 1 Touch the display panel t...

Page 12 - Display Mode

10 -EN Display Mode WIDE (Default Setting) / CINEMA / NORMAL WIDE: The monitor displays a normal picture wider to fi t in a wide-screen monitor by evenly stretching out the picture horizontally. CINEMA: The monitor displays a normal picture by stretching out the picture vertically. This mode is good...

Page 13 - General Setups; System Setup Operations; Setting the Brightness of the

11 -EN Setup The operation cannot be performed while the vehicle is in motion. In order to operate the setup, enable lock-out function. See page 21 for details. General Setups You can fl exibly customize the unit to suit your own preferences and usage. Use steps 1 through 4 to select one of the Setu...

Page 14 - Press and hold the center of [; AUX Setup Operations; Source Name; Setting the Video Signal

12 -EN Adjusting the Minimum Level of Backlight (Dimmer Low Level) Min (0) to Max (16) (Default Setting: Min) If Low is set in “Setting the Brightness of the Backlighting (Dimmer)” (page 11), you can adjust the brightness of the backlighting. This function can be used, for instance, to change the sc...

Page 15 - Navigation Setup Operations; Setting Output of the Navigation Guidance; Setting Region Manually; Camera Setup Operations; Flipping the Screen Horizontally

13 -EN Navigation Setup Operations Adjusts the Navigation display setting. Refer to page 14 for details. Returns to the factory default settings of Navigation setup. The message, "Restore default settings?" appears. Touch "Restore" to go back to the default settings. Setting Output o...

Page 16 - ] for the selected item to; ] to exit display setup; Display Setups; Select the desired setup screen.

14 -EN Camera Display Setup Brightness / Color / Tint / Contrast / Sharpness 4 Touch [ ▲ ] or [ ▲ ] for the selected item to change its setting. • When there are no more selections to view, the arrow is gray. 5 Touch [ ] to exit display setup menu. Adjusting Picture Brightness Min (-15) to Max (+15)...

Page 17 - Adjusting Picture Contrast; Adjusting Picture Sharpness; Visual EQ Mode; Reset Display Setting; Information; In Case of Dif; Basic

15 -EN Adjusting Picture Contrast Low (-15) to High (+15) (Default Setting: 0) Touch [ ▲ ] or [ ▲ ] adjust object contrast on the screen. When it reaches the minimum or maximum contrast level, the display shows “Low” or “High,” respectively. Adjusting Picture Sharpness Soft (-15) to Hard (+15) (Defa...

Page 18 - No picture is produced.; Picture is unclear or noisy.; Caution Display

16 -EN No picture is produced. • Monitor’s mode is not switched to the mode you want to see. Switch to the mode you want to see.Make sure your input device is connected. Picture is unclear or noisy. • Vehicle’s battery power is weak. Check the battery power and wiring. (The unit may malfunction if t...

Page 19 - MONITOR SECTION; GENERAL; HIDEAWAY BOX; Accessories; Check accessory parts

17 -EN Speci fi cations MONITOR SECTION Screen Size 6.5 inch Resolution WVGA Operation System TFT active matrix Number of Picture Elements 1,152,000 pcs. Effective Number of 99.99% or more Picture Elements Illumination System LED GENERAL Power Requirement 14.4 V DC (11–16 V allowable) Operation Temp...

Page 20 - MAKE THE CORRECT CONNECTIONS; Installation and Connections

18 -EN Before installing or connecting the unit, please read the following and pages 2 to 3 of this manual thoroughly for proper use. WARNING MAKE THE CORRECT CONNECTIONS Failure to make the proper connections may result in fi re or product damage. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (C...

Page 21 - Be sure to disconnect the cable from the (–) battery; Mounting Options; Mounting the Monitor on the Dashboard; Mounting Monitor at Headrest

19 -EN PRECAUTIONS • Be sure to disconnect the cable from the (–) battery post before installing your TME-S370. This will reduce any chance of damage to the unit in case of a short-circuit. • Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit ...

Page 22 - Connections

20 -EN Connections White/Brown Yellow/Black Orange/White FOOT BRAKE REVERSE ACCESSORY Battery HAND BRAKE Yellow/Blue Yellow/Blue PARKING BRAKE REMOTE OUT White/Pink White/Brown White/Pink M.CONT REMOTE OUT M.CONT Red ACCESSORY Black GND To the parking brake indicator lead. Separate cable is included...

Alpine TME-S370 - Manual

Table of Contents:

Summary

Other Alpine Models