Alpine PSS-24WRA - User Manual

Alpine PSS-24WRA

Alpine PSS-24WRA Car Sound System – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 2 – Jeep Wrangler; Types of Precautions; Warning
  • Page 3 – Tools Required
  • Page 4 – Accessory List
  • Page 5 – Unclip and remove the panel below the steering; Front speaker removal and installation
  • Page 6 – Front speaker removal and installation (continued)
  • Page 7 – There is an electronic module attached to the
  • Page 9 – Insert Polyfill
  • Page 10 – Sub Woofer/Amp Installation; Extract (4) T50 Torx Screws from the passenger side; Tilt the passenger seat towards the back to reveal; Front of Vehicle
  • Page 12 – Rear Soundbar Speaker Removal & Installation
  • Page 13 – Troubleshooting Guide; Symptom
  • Page 14 – OEM Head Unit Wiring Diagram; Black squares indicate position of switches.; To Vehicle Connectors; ADAPTER
  • Page 15 – Alpine Restyle Head Unit Wiring Diagram; POWER PACK AMPLIFIER KTP-445U
Loading the manual

Jeep Wrangler

PSS-24WRA V20211025

˜

1/15

Jeep Wrangler

PSS-24WRA
Installation Manual

˜

Model: Wrangler JL 2018-Up

˜

Model: Gladiator JT 2020-Up

Introduction

˜

Congratulations on purchasing the PSS-24WRA. This installation manual is designed to take you through
the step-by-step installation of PSS-24WRA into a 2018-Up Jeep Wrangler JL or Jeep Gladiator JT 2020-Up.
Please familiarize yourself with the owners manual as this is a challenging installation. If you still have
additional questions please call 1-800-TECH-101.

Note

˜

Design and specifications are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

˜

The installation of this product requires specialized skills and experience. This is an installation that is
challenging and time consuming even for installers with experience. A professional installer would typically
take a minimum of 4-5 hours to complete this installation. We recommend that you have the product installed
by an Alpine authorized dealer.

˜

Before you use this product, be sure to carefully read this installation manual and the separate user’s manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.

˜

This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below.
Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

Warning

Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.

Caution

Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.

Jeep

Model

Year

Wrangler JL**

2018 – Up

Gladiator JT**

2020 – Up

** The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is

not guaranteed if the manufacturer has made production changes to the listed vehicles above.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Jeep Wrangler; Types of Precautions; Warning

Jeep Wrangler PSS-24WRA V20211025 ˜ 2/15 Types of Precautions Forbidden Indicates actions that are forbidden (must not be performed) Forbidden Indicates that disassembly is forbidden. Mandatory Indicates actions that are mandatory (must be performed) Marks content that should receive your full atten...

Page 3 - Tools Required

Jeep Wrangler PSS-24WRA V20211025 ˜ 3/15 Tools Required Wire Strippers Sockets: 7mm, 8mm, 10mm, 13mm Panel Removal Tools Wire Cutters Extension Ratchet #2 Phillips Screwdriver Torx T15, T20, T30, T50 5mm Allen Wrench Digital Multimeter Cordless Power Drill Air saw or similar Silicone

Page 4 - Accessory List

Jeep Wrangler PSS-24WRA V20211025 ˜ 4/15 Accessory List Front speaker pods 6.5” Woofers Tweeters Amplifier Assembly Tweeter Adaptors SPV-65-JLT Template Cable Ties (10) Replacement Bolts x 8 Crossovers Bass Control Knob Main Harness TW level 0db TW level +3db TW level +3db TW level 0db T-Harness Pow...

Other Alpine Car Sound Systems Models

All Alpine Car Sound Systems