Alpine PSS-23WRA2 - User Manual
Alpine PSS-23WRA2 Subwoofer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Jeep Wrangler; UNLIMITED JL; Warning
- Page 3 – Tools Required
- Page 4 – Factory Equipment Removal Process
- Page 5 – Factory Equipment Removal Process (continued); Front of Vehicle
- Page 6 – Installation; Note: seal the grommet; factory ground stud below the center console.
- Page 7 – Connect the main harness to the amplifier assembly; Connect the T-harness and main harness to the
- Page 8 – OEM Head Unit Wiring Diagram; POWER PACK AMPLIFIER KTP-445U; To Vehicle Connectors; ADAPTER
- Page 9 – Aftermarket Head Unit Wiring Diagram
- Page 10 – Alpine Restyle Head Unit Wiring Diagram
- Page 11 – Troubleshooting Guide; Symptom
Jeep Wrangler
UNLIMITED JL
z
1/11
Jeep Wrangler
PSS-23WRA Sound System
Installation Manual
z
Model: 4-Door Wrangler Unlimited JL
z
Model Year: 2018 –UP
*Not compatible with factory amplified systems
Introduction
z
Congratulations on purchasing the PSS-23WRA. This installation manual is designed to take you through
the step-by-step installation of the PSS-23WRA into a 2018 -Up Jeep Wrangler Unlimited. Please familiarize
yourself with the owner’s manual and if you still have additional questions please call 1-800-TECH-101.
Note
z
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
z
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
z
Before you use this product, be sure to carefully read this installation manual and the separate user’s manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
z
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly may
lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly may
lead to injury or property damage.
Jeep
Model
Year
Wrangler Unlimited
2018 – UP
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin, remove the ground wire from the NEGATIVE (-)
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Jeep Wrangler UNLIMITED JL z 2/11 Types of Precautions Forbidden Indicates actions that are forbidden (must not be performed) Forbidden Indicates that disassembly is forbidden. Mandatory Indicates actions that are mandatory (must be performed) Marks content that should receive your full attention. W...
Jeep Wrangler UNLIMITED JL z 3/11 Tools Required Panel Removal Tool Sockets Phillips Screwdriver 7mm 10mm Wire Cutters Extension Ratchet T50 Torx Cordless Power Drill Cordless Impact Gun Accessory List Amplifier Assembly T-Harness Main Harness (10) Cable Ties RCA Adapters Power Cable Front Top Dash S...
Jeep Wrangler UNLIMITED JL z 4/11 1 Use a panel removal tool to release (2) clips on the top of the plastic knee cover and remove it. 3 Extract (2) 7mm/Phillips screws on the bottom of the radio bezel. 5 Extract (4) 7mm/Phillips screws from the factory radio, disconnect and remove it. 2 Use a panel ...
