Allied Telesis Patch 89262-08 - Manual
Allied Telesis Patch 89262-08 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Level 1
- Page 3 – Level 3
- Page 4 – Level 4; Level: 3; Level: 2
- Page 10 – show tacplus
- Page 18 – add qos port
- Page 23 – Command Reference; show ip igmp; Syntax; Description
- Page 24 – Examples; See Also; enable ip igmp allgroup
- Page 25 – disable ip igmp allgroup
- Page 26 – add igmpsnooping routeraddress
- Page 27 – set igmpsnooping routermode; delete igmpsnooping routeraddress
- Page 28 – show igmpsnooping routeraddress; ICMP Redirect Messages for IPv6
- Page 29 – Importing BGP routes into OSPF
- Page 30 – set ospf
- Page 31 – show ospf
- Page 32 – add ip filter; Availability
S i m p l y c o n n e c t i n g t h e w o r l d
Patch Release Note
Patch 89262-08
For AT-8900 Series Switches
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 89262-08 for Software Release 2.6.2 on existing models of AT-8900 Series
switches. Patch file details are listed in Table 1.
This release note should be read in conjunction with the following documents:
■
www.alliedtelesyn.co.nz/documentation/documentation.html
.
■
www.alliedtelesyn.co.nz/documentation/documentation.html
.
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
Table 1: Patch file details for Patch 89262-08.
Base Software Release File
89-262.rez
Patch Release Date
15-Oct-2004
Compressed Patch File Name
89262-08.paz
Compressed Patch File Size
324452 bytes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Patch Release Note Patch 89262-08 for Software Release 2.6.2 C613-10402-00 REV H Some of the issues addressed in this Release Note include a level number. This number reflects the importance of the issue that has been resolved. The levels are: From Patch 89262-07 onwards, issues for each patch are...
Patch 89262-08 For AT-8900 Series Switches 3 Patch 89262-08 for Software Release 2.6.2C613-10402-00 REV H When STP is enabled, when frames with a multicast destination MAC address were sent, a loop was observed within the network. This issue has been resolved. In network configurations with multiple...
4 Patch Release Note Patch 89262-08 for Software Release 2.6.2 C613-10402-00 REV H Fixing speed on a fibre SPF to 1000mfull in a configuration script showed up incorrectly as 10mfull actual speed after reboot. This issue has been resolved. Level 4 No issues. Enhancements No issues. Features in 89262...
