Alliance HF900- Manual

2 7 Environmental Disposal of Unit This appliance is marked according to the European directive 2002/96/ EC on Waste Electrical and Electronic Equipment (WEEE).This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be hand...

2 8 Explanation of Safety Messages Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,” “WARNING,” and “CAUTION”) followed by specific instructions. These precautions are intended for the personal safety of the operator, user, servicer, and those maintainin...

2 9 Important Safety Instructions WARNING To reduce the risk of fire, electric shock, serious injury or death to persons when using your washer, follow these basic precautions: 1. Read all instructions before using the washer.2. Refer to the GROUNDING INSTRUCTIONS in the installation Manual for the ...

2 10 2 21. Loading door MUST BE CLOSED any time the washer is to fill, tumble, or spin. DO NOT bypass the loading door switch by permitting the washer to operate with the loading door open. 22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warn...

2 11 Operator Safety WARNING NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury. To ensure the safety of machine operators, the following maintenance checks must be performed daily:1. Prior to operating the machine, verify that all warn...

3 12 Technical data HF455, IHF455, IHF100, CHF100 Technical data and dimensions METRIC US Capacity (dry weight) Ratio [kg/Lit] 1:11 41,4 kg 91.27 lb. 1:10 45,5 kg 100.31 lb. 1:9 50,5 kg 111.33 lb. Cylinder Diameter 980 mm 38.58 inch Depth 597 mm 23.50 inch Volume 455 Lit 16.07 ft³ Cabinet Height 192...

Label 1 Label 2 20 4 Installation and Connection Instructions Surface CAUTION Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked. ...

4 1138 [44.8] 1300 [51.18] 1365 [53. 74 ] 44 [1. 73 ] 81 [3.19] Ø 20 [Ø 0. 79 ] 44 [1. 73 ] 81 [3.19] Ø20 [Ø 0. 79 ] Ø20 [Ø 0.7 9] Ø20 [Ø0. 79] 1453 [57 .2 ] 24 Mounting Bolt Hole Locations for machines, HF900, IHF900 Legend: metric mm [inches]

25 4 The machine is delivered with hoses with 3/4" connections (HF455-575) and with 1x3/4" + 3x1" connections (HF730-900). These hoses fit the water inlet valves of the machine and the main water inlet taps. All the inlet valves have to be connected. To ensure the optimal functioning of ...

4 26 Electrical Installation ImportantElectrical ratings are subject to changes. Refer to serial plate decal for electrical ratings information specific to your machine. WARNING Hazardous Voltage. Can cause shock, burn or cause death. Allow machine power to remain off for two minutes prior to workin...

4 27 Use wire sizes indicated in Table 2 through 5 for runs up to 50 feet. Use next larger size for runs of 50 to 100 feet. Use two sizes larger for runs greater than 100 feet. For personal safety and proper operation, the washer-extractor must be grounded in accordance with state and local standard...

4 Label 3 28 Main power connection Connection label: Machine power connections are made at the back of the machine. Three or four conductor power cable is the recommended method (See chapter electrical specs for minimum cable requirements, if local electrical codes exceed these requirements, follow ...

4 30 WARNING The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HF455, IHF455, IHF100, CHF100 455 liters / 100 pounds Boiler Fed/Steam Heat Electric Heat Code Voltage Cycle Phase Wire Full Load Amps Recommen...

4 Label 4 34 Automatic lubricator The bearing house of the machine is equipped with a lubricating device (A) which automatically lubricates the bearing during one year. Upon delivery of the machine, this lubricator has not been brought into use. To this effect, please put on the matching screw (B) i...

Label 5 Label 6 4 35 The liquid soap connection consists of 8 connections for liquid soap (See Label 5). The central opening is used for ventilation. Liquid soap connection (option) Connection of the liquid soap hoses WARNING Dangerous Chemicals. May damage eyes and skin. Wear eye and hand protectio...

Label 10 Label 11 Label 12 Label 13 4 A 37 Connection of a central operating panel for coin machines (option) WARNING To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not discon...

5 2 3 4 5 3 1 6 7 7 7 38 Steam connection Machines with steam heating must have a steam valve between the steam installation and the machine. WARNING Never touch internal or external steam pipes, connections, or components. These surfaces can be extremely hot and will cause severe burns. The steam m...

6 Label 14 Label 15 39 Internal connections of the electrical heating NOTE: Other executions are available as options. 3 AC 1 AC Technical remarks Heating 3x230V R5 3x400V R5 4,2kw 3x1,4kw See Label 14 LC1D0901 See Label 15 LC1D0901 6kw 3x2kw See Label 14 LC1D0901 See Label 15 LC1D0901 9kw 3x3kw See...

6 1/2 1/2 1/3 Label 16 A B C C 40 The out of balance switch is mounted on the solid part of the machine. There is a window around the probe of the out of balance switch that is mounted on the movable part of the machine.When the machine goes out of balance by overloading or uneven distribution of th...

7 41  Clean the entire cabinet of the machine regularly and remove all traces of soap, etc....  Remove all detergent residue in the soap dispenser with hot water.  Clean the door gasket and remove all detergents and other products.  Shut off the main water, steam, and power connections at the en...

7 42  Verify that the belts are running in the middle of the basket pulley.  Verify the belt tension according to the table below. Belt tension measurements should be taken as close as possible to the center of the belt span (see figure). Annual maintenance Belt tension: Belt tension testing table...

8 Label 17 Label 18 43 Contact Information Nameplate Nameplate Location The nameplate is located at the rear of the machine. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. See Labels 17 and 18.

8 44 Replacement Parts If literature or replacement parts are required, contact the source from which the machine was purchased or contact the phone numbers or websites shown on the nameplate. Position of the Serial plate

9 45  In case of important malfunctions and deficiencies, which you cannot resolve yourself, contact your distributor. Repair and after-sales service Machine : Type: ......................................................................................Program: .........................................