Air King B600 - Manual
Air King B600 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SECTION 3; SECTION 4; Figure 2; REPLACEMENT PARTS DIAGRAM; Figure 5
- Page 4 – LIRE ET CONSERVER CES INSTRUCTIONS; CONSERVER CES INSTRUCTIONS POUR RÉFÉRENCES FUTURES.; INSTRUCTIONS GÉNÉRALES DE SÉCURITÉ; toujours être suivies pour réduire les risques d’incendie, de choc; La Soufflante; INSTRUCTIONS IMPORTANTES –; INSTRUCTIONS D’INSTALLATION; SECTION 1; SECTION 2; Figure 1; CONSERVER CES INSTRUCTIONS
- Page 5 – DIAGRAMME DES PIÈCES DE REMPLACEMENT
- Page 7 – LEA Y GUARDE ESTAS INSTRUCCIONES; CONSERVE LAS INSTRUCCIONES PARA REFERENCIA FUTURA.; INFORMACIÓN GENERAL DE SEGURIDAD; básicas para reducir el riesgo de incendio, choque eléctrico y; El Soplador; INSTRUCCIONES IMPORTANTES –; INSTRUCCIONES DE INSTALACIÓN; SECCIÓN 1; SECCIÓN 2; CONSERVE ESTAS INSTRUCCIONES; Figura 1; hexagonales
- Page 8 – SECCIÓN 3; SECCIÓN 4; Figura 2; DIAGRAMA DE REPUESTOS; Figura 5
www.airkinglimited.com
111597005 New 3-07
1 of 8
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT
YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSON, OBSERVE THE FOLLOWING:
1.
Read all instructions before installing or using range hood.
2.
Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer.
3.
Before servicing or cleaning the unit, switch power off at service panel
and lock the service disconnecting means to prevent power from being
switched on accidentally. When the service disconnecting means cannot
be locked, securely fasten a prominent warning device, such as a tag, to
the service panel.
4.
Installation work and electrical wiring must be done by qualified person(s)
in accordance with all applicable codes and standards, including fire-
related construction.
Model B600
Blower
SAVE THESE INSTRUCTIONS
5.
Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent back
drafting. Follow the heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire Protection
Association (NFPA) and the American Society for Heating, Refrigeration,
and Air Conditioning Engineers (ASHRAE), and the local code authorities.
CAUTION:
FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO
EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS.
6.
To avoid motor bearing damage and noisy and/or unbalanced impellers,
keep drywall spray, construction dust, etc. off power unit.
7.
Refer to the instructions included with the Range Hood Canopy for additional
safety information.
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
INSTALLATION INSTRUCTIONS
CAUTION:
MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL
BEFORE STARTING INSTALLATION.
WARNING:
THIS BLOWER IS INTENDED FOR USE ONLY IN AIR KING
PROFESSIONAL SERIES RANGEHOOD CANOPIES MARKED SUITABLE FOR USE
WITH THIS BLOWER. DO NOT TO INSTALL IN ANY OTHER APPLICATION.
SECTION 1
Preparing for installation
NOTE:
Before installing blower, make sure range hood canopy is properly
installed and securely in place. See “Range Hood Mounting Instructions”.
1.
Unpack blower from the carton and confirm that all pieces are present. In
addition to the blower you should have:
8 - 8-32 Screws
8 - Washers
1 - Fuse
1 - Instruction/Safety Sheet
2.
The installation of the blower is slightly different from one canopy height
to another. For 18" high canopies proceed to
Section 2
, for 10" high canopies
proceed to
Section 3
.
SECTION 2
Installation into 18" High Canopy
1.
Lift blower up into the hood canopy and slide the keyhole slots in the motor
mounting flange over the two studs of the hood. Slide the motor into place
and tighten the hex nuts on the mounting stud while lining up the 8 holes
in the motor mounting flange to the 8 screw studs of the hood
(Figure 1)
.
Figure 1
Keyholes
Stud w/Hex Nuts
Screw Stud
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
www.airkinglimited.com 111597005 New 3-07 2. Using the included 8-32 screws and washers, mount the blower in placeand tighten all screws. Confirm that the blower is securely seated in placeand there are no air gaps around the blower gasket. 3. Plug both the 3 wire and 4 wire quick connect cords from...
www.airkinglimited.com 111597005 New 3-07 4 of 8 LIRE ET CONSERVER CES INSTRUCTIONS LIRE SOIGNEUSEMENT AVANT DE TENTER D’ASSEMBLER, INSTALLER, OPÉRER OU DE RÉPARER LE PRODUIT DÉCRIT. PROTÉGEZ VOUS-MÊME ET LES AUTRES EN OBSERVANT TOUTE L’INFORMATION DE SÉCURITÉ. FAILLIR À SE CONFORMER AUX INSTRUCTION...
www.airkinglimited.com 111597005 New 3-07 2. En utilisant les vis 8-32 et les rondelles comprises, monter la soufflante enplace et serrer toutes les vis. Confirmer que la soufflante est solidementassise en place et qu’il n’y a pas de fuite d’air autour du joint d’étanchéitéde la soufflante. 3. Branc...
