Page 2 - WARNING; CAUTION; GENERAL PRECAUTIONS; PRECAUTIONS; PACKAGE CONTENTS; English
- 2 - General Prohibitions General Precautions Prohibitions on Dismantling the Unit Prohibitions on Subjecting the Unit to Water WARNING (Negligence could result in death or serious injury to people) 1. Do not dismantle or alter the unit as it could result in a fire or electric shock.2. Do not conne...
Page 3 - DESCRIPTION; Description
- 3 - 1-2 1-3 1-4 English Package contents (acoustic interface kit IAI-100) 1. Driver unit DR-1002. Screws3. Rubber seal4. Acoustic I/O tube AI-1005. Temporary installation jig6. Tube fixer FF-1007. Counter installation screw English Package contents (acoustic tube IAX-100) 1. Acoustic tube IAX-1002...
Page 4 - Operator units; Position under the desk. Can be installed with the mounting; INSTALLATION
- 4 - Operator units [1] Main unit MU-100 Position under the desk. Can be installed with the mounting bracket provided. [2] Operation unit OU-100 Position on the left or right of the window desk, in a user- friendly location. [3] Power supply adapter PS-2420UL/2420S Position between the AC outlet an...
Page 5 - Acoustic interface; Outer microphone/speaker
- 5 - English Acoustic interface [1] Center of acoustic I/O tube[2] Customer[3] Barrier glass[4] Upper acoustic tube (2)[5] Upper acoustic tube (1)[6] Acoustic I/O tube[7] Lower acoustic tube[8] Driver unit[9] Tube fixer1. Estimate the average height of customers, taking into account gender and age ...
Page 6 - Main materials and tools; MOUNTING
- 6 - 4-1 English Main materials and tools 1. Main materials• Double-sided tape Select a tape suitable for your usage environment.Recommendation: 4910 (made by 3M)If you are using the acoustic tube system, cut a piece of tape approximately 50cm (20") longer than the total length of the tubes. If...
Page 7 - Main unit; Operation unit
- 7 - English Main unit Install the main unit under the counter or desk on the operator side. The cables from the other units will be connected at a later stage by temporarily removing the main unit.[1] Mounting bracket[2] Counter/desk[3] Switch[4] Front panel[5] Main unit[6] Terminal block[7] Trans...
Page 8 - Installation preparations for the acoustic interface; Installation of the acoustic interface (tube fixer)
- 8 - 4-4 1. When the installation position is on the left as seen from the customer side, the acoustic I/O tube can be installed unchanged from its shipped configuration. When installing it on the right, while referring to the diagram, reverse the left/right direction of both slit plates of the aco...
Page 10 - Installation of the acoustic interface (upper acoustic tube)
- 10 - 4-8 English Installation of the acoustic interface (acoustic I/O tube) [1] Fixing base of the acoustic I/O tube[2] Fixing base of the lower acoustic tube1. Remove the fixing base from the acoustic I/O tube main unit.2. Attach double-sided tape to this fixing base. With the red label on the up...
Page 11 - Acoustic interface wiring
- 11 - 4-10 English Acoustic interface wiring [1] Speaker cable from main unit[2] Microphone cable from main unit[3] Temporary installation jig[4] Acoustic I/O tube main unit[5] Microphone cord[6] Chassis[7] Cord groove1. Pull the transmit output speaker cable and receive microphone input cable that...
Page 12 - Fixing of acoustic interface
- 12 - 4-11 English [4] Connection ridge[5] Upper acoustic tube (2)[6] Upper acoustic tube (1)[7] Acoustic I/O tube[8] Lower acoustic tube[9] Microphone cord[10] Chassis[11] Rubber seal[12] Acoustic tube[13] Set screw[14] Lead cable (driver unit)[15] Microphone cable[16] Speaker cable[17] Driver mai...
Page 14 - WIRING DIAGRAM; Page Speaker; OP
- 14 - 5 WIRING DIAGRAM CON 1 12 [1] [4] [4] [4] Page Speaker OP 1 MU-100 2 OU-100 3 IME-100 ISE-100 4 DR-100 5 AI-100 IAX-100 6 PS-2420UL / 2420S - + +: RedSW: White-: Shield [3] [2] [3] [5] E: Shield +: Red -: White C: White H: Black 7 8
Page 15 - Wiring; Cable layout
- 15 - 5-1 English Wiring 1. Main unit MU-1002. Operation unit OU-1003. Gooseneck microphone IME-1004. Driver unit DR-1005. Acoustic I/O tube AI-100 and acoustic tube IAX-1006. Power supply adapter PS-2420UL/2420S7. Sensor ISE-1008. Paging speaker (option) Suitable paging speakers have 4 to 6 Ω impe...
Page 16 - Names; NAMES
- 16 - English Names [1] POWER LED (green)[2] TALK switch (orange)[3] VOL switch (orange)[4] PAGE switch (orange)[5] Gooseneck microphone[6] Receive speaker[7] Headset connectors[8] POWER switch[9] VOX sensitivity knob[10] Transmit volume knob[11] Paging volume knob[12] Receive volume knob[13] Noise...
Page 17 - SETTING UP; Setting up
- 17 - 7 SETTING UP [5] Adjust the sensitivity of the VOX circuit.• With the equipment arranged as it would be during use, have someone talk from the operator position. Adjust the VOX sensitivity knob by turning it clockwise so that it responds to the voice and the green LED illuminates. Adjust so t...
Page 18 - OPERATIONS; Operation
- 18 - 8 OPERATIONS English Operation [1] Turn on the POWER switch of the main unit. The green lamp illuminates to show that electricity is being supplied and the system can be used. [2] Turn on the TALK switch of the operation unit. The orange lamp illuminates to show that communication is possible...
Page 19 - SPECIFICATIONS
- 19 - 9-1 9-2 9-5 English Specifications (main kit IMU-100) • Power source: DC 24V • Current consumption: 120 mA (standby) 780 mA (maximum) • Operating temperature: 0 ° C to 40 ° C • Communication: Voice-actuated communicationTransmit output: 3 W 4 Ω Receive output: 1.5 W 16 Ω • Headset: Ø3.5 plugI...
Page 20 - WARRANTY; Printed in Japan
- 20 - Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose...
