Aiphone GFO-1DL - Manual

Aiphone GFO-1DL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – WALL; CUT OUT HOLE; Cut appropriate sized
Page 3 – PROGRAMMING DIGITAL ENTRANCE PANEL* TO CALL GFO-1DL ROOM STATIONS:; Continue programming each station in the system in this manner.
Page 4 – Answer the call at the tenant station by pressing the TALK button.; NOTE: There is a brief delay when initially; subsequent presses of the TALK button.; button to release; TROUBLESHOOTING GUIDE:
Page 5 – FCC Class B Verification; Toll Free Technical Support:

Loading the manual

Open Voice Tenant Station for the GF System

- INSTRUCTIONS -

The GFO-1DL and GFO-1DLF are open voice tenant stations for the GF system. The unit features door answering and
door release with up to five entrance stations, Concierge call, and the connection of an optional panic call station (GFK-
PS). A separate standard doorbell can be added to ring the unit with a unique tone. The unit includes TALK, DOOR
RELEASE, and CONCIERGE CALL buttons. Each GFO-1DL counts as 2.5 handset stations on a standard GF system,
therefore the maximum capacity of the system is 100 stations (see specifications).

NAMES & FUNCTIONS:

TALK:

Press to

answer call, release

to listen

END:

Press to end the

call (with the entrance

panel or concierge).

KEY SYMBOL:

Press

to release the door

BELL SYMBOL:

Press

TALK first, then BELL button

to call the Concierge/

Security Guard (if

applicable)

Microphone

Speaker

LED:

Green during

communication

VOLUME:

Controls

incoming volume

CALL TONE VOLUME:

3-position switch underneath faceplate

to adjust call tone to OFF, MID, HIGH.

LED flashes red when call tone is OFF.

COMPATIBILITY:

1. The GFO-1DL can be used in any GF system as an audio-only open voice room station.

(No video if used in a video system.)

- GF Audio entry with buttons
- GF Audio entry with digital entrance panel
- GF Video entry with buttons
- GF Video entry with digital entrance panel

2. Station capacity of the GF system changes when using open voice tenant stations. Each GFO-1DL

occupies the capacity of 2.5 handset or monitor stations, thus lowering the overall number of
tenant stations allowed in a system.

1105

Pg. 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - WALL; CUT OUT HOLE; Cut appropriate sized

Pg. 2 PS-2410LC WIRING DIAGRAM: (Entrance panel(s) not shown) Common Bus Line R1R2 + - GF-BC + - R1R2 C CE K KE GFO-1DL R1R2 C CE K KE GFO-1DL R1R2 C CE K KE GFO-1DL *Optional Features Red Blk Wire junction point** **Distribution point can be any type of terminal strip, punch down block, or suitable...

Page 3 - PROGRAMMING DIGITAL ENTRANCE PANEL* TO CALL GFO-1DL ROOM STATIONS:; Continue programming each station in the system in this manner.

PROGRAMMING THE SYSTEM (INDIVIDUAL BUTTON PANEL): 1. Remove faceplate of GF entrance panel.2. Lift rubber cap located on the upper right side of the GF-DA/B speaker module.3. Using a long slender tool, momentarily press the programming button through the hole inside the GF-DA/B.4. The In-Use LED wil...

Page 4 - Answer the call at the tenant station by pressing the TALK button.; NOTE: There is a brief delay when initially; subsequent presses of the TALK button.; button to release; TROUBLESHOOTING GUIDE:

OPERATION: 1. Press the tenant's call button on the entrance panel, and a ring tone will be heard at the tenant station. 1a. If a digital entrance panel is used, enter the tenant's 3 or 4 digit code or scroll to their name, then press the green-lit "bell" button on the entrance panel. 2. Ans...