AEG 140 D- User Manual

Page 2 - CableFast Cabling; Features of the CableFast Cabling System; Overview

CableFast Cabling 858 840 USE 100 00 September 2002 Features of the CableFast Cabling System Overview The CableFast wiring system consists of pre-wired Quantum field wiring terminal strips, available in various cable lengths that are terminated with "D" type connectors. The "D" conne...

Page 3 - CableFast Cables; AEG AEG

CableFast Cabling 840 USE 100 00 September 2002 859 Quantum Modules and Backplane The following figure shows the Quantum modules and backplane components. Note: Ensure that the wiring panduits are large enough to support 12 ft. cables. 1A80 1A79 2A82 2A81 CableFast Cables CableFast TerminalBlocks on...

Page 4 - Specifications

CableFast Cabling 860 840 USE 100 00 September 2002 Specifications All CableFast systems are designed to the following specifications. Specifications Power Ratings 150 Vac/Vdc @ 0.5 A per point 150 Vac/Vdc @ 2.0 A per point * *Requires the 140CFG01600 Terminal Block and the 140XTS012XX Cable Dielect...

Page 6 - CF

CableFast Cabling 862 840 USE 100 00 September 2002 Terminal Block Selection Guide Use this table to select valid combinations of Quantum I/O modules and CableFast terminal blocks. 140ACI03000 X X X 140ACO02000 X X X 140ACI04000 X 140ACO13000 X 140ARI03010 X 140ATI03000 X (See Note 3) 140AMM09000 X ...

Page 10 - All CableFast terminal blocks have the following features.; CableFast; UL component

CableFast Cabling 866 840 USE 100 00 September 2002 CableFast Terminal Block Features All CableFast terminal blocks have the following features. CableFast Terminal Block Stacking Convention The following figure and table show the stacking convention used by CableFast terminal blocks. CableFast TM 14...

Page 11 - Features of the CableFast Cabling System, p. 858

CableFast Cabling 840 USE 100 00 September 2002 867 140CFA04000 CableFast Cabling Block Overview The A block is a straight through point-to-point connection on the terminal block. Wiring of this block is identical to wiring the Quantum I/O connector (140XTS00200). See Features of the CableFast Cabli...

Page 13 - Wiring Figure; The following figure shows the wiring for the CFA04000 module.; block is identical to

CableFast Cabling 840 USE 100 00 September 2002 869 Wiring Figure The following figure shows the wiring for the CFA04000 module. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 The wiring of the 140CFA04000 block is identical to wiring t...

Page 14 - Terminal Block; – Arranged in four groups of eight I/O points. Two terminals per; le

CableFast Cabling 870 840 USE 100 00 September 2002 140CFB03200 Quantum CableFast Cabling Block Overview The B block is used for individually fused 2-wire digital inputs. This terminal block is designed to prevent a single point failure from affecting the remaining inputs. It is not recommended for ...

Page 15 - Dimensions

CableFast Cabling 840 USE 100 00 September 2002 871 Dimensions The following figures show the dimensions for the 140CFB03200 terminal block. 4.4 in (111.8 mm) 3.3 in (83.8 mm) 2 1 8 7 6 5 4 3 10 9 16 15 14 13 12 11 18 17 24 23 22 21 20 19 26 25 32 31 30 29 28 27 VD+VC+ 9.3 in (236.2 mm) 2+ 1+ 8 + 7+...

Page 16 - GRO; Field Side; Fuse Part Numbers

CableFast Cabling 872 840 USE 100 00 September 2002 Wiring for the Imput Modules The following figure shows the 140CFB03200 wiring for the following input modules: 140DAI35300, 140DAI45300, 140DAI55300, 140DDI35300, and 140DDI85300. 1 1+ 2 2+ 3 3+ 4 4+ 5 5+ 6 6+ 7 7+ 8 8+ 9 9+ 10 10+ 11 11+ 12 12+ 1...

Page 17 - be used to jumper the power between groups.

CableFast Cabling 840 USE 100 00 September 2002 873 Note: The terminal block commoning strip, Modicon # 140CFX00110 (Qty. 10) can be used to jumper the power between groups.

Page 21 - Module

CableFast Cabling 840 USE 100 00 September 2002 877 Application Notes The following are the application notes for the 140CFC03200 module. 1. Configuration – Arranged in four groups of eight I/O points (two terminals per point). This block may be used for one- and two-wire inputs or outputs. The inpu...

Page 22 - can be used to jumper the power between groups.; OUP; A Fuse Part Numbers

CableFast Cabling 878 840 USE 100 00 September 2002 Wiring Diagram for Input Modules The following shows the 140CFC03200 wiring for the following input modules: 140DAI35300, 140DAI45300, 140DAI55300, 140DDI35300, and 140DDI85300. Note: The terminal block commoning strip, Modicon # 140CFX00110 (Qty. ...

Page 23 - OUP B

CableFast Cabling 840 USE 100 00 September 2002 879 Wiring Diagram for DDI15310 Input Module The following figure shows the 140CFC03200 wiring for the 140DDI15310 input module. 1 1+/- 2 2+/- 3 3+/- 4 4+/- 5 5+/- 6 6+/- 7 7+/- 8 8+/- 9 9+/- 10 10+/- 11 11+/- 12 12+/- 13 13+/- 14 14+/- 15 15+/- 16 16+...

Page 25 - GROU; A Fuse Part Numbers

CableFast Cabling 840 USE 100 00 September 2002 881 Wiring Diagram for DDO15310 Output Module The following figure shows the 140CFC03200 wiring for the 140DDO15310 output module. 1 1+/- 2 2+/- 3 3+/- 4 4+/- 5 5+/- 6 6+/- 7 7+/- 8 8+/- 9 9+/- 10 10+/- 11 11+/- 12 12+/- 13 13+/- 14 14+/- 15 15+/- 16 1...

Page 30 - Wiring Diagram; The following figure shows the wiring for the 140CFD03200 module.; Module Input; Wire Sensor; DC Input Module

CableFast Cabling 886 840 USE 100 00 September 2002 Wiring Diagram The following figure shows the wiring for the 140CFD03200 module. GROUP B GROUP C GROUP D GROUP A Field Side Connections Module Input Module Input Module Input Module Input Module Input Module Input Module Input Module Input PROX PRO...

Page 33 - The following figure shows the wiring for the 140CFE03200 module.; Group C Power

CableFast Cabling 840 USE 100 00 September 2002 889 Wiring Diagram The following figure shows the wiring for the 140CFE03200 module. 1 1+/- 2 2+/- 3 3+/- 4 4+/- 5 5+/- 6 6+/- 7 7+/- 8 8+/- 9 9+/- 10 10+/- 11 11+/- 12 12+/- 13 13+/- 14 14+/- 15 15+/- 16 16+/- 17 17+/- 18 18+/- 19 19+/- 20 20+/- 21 21...

Page 35 - The following figure shows the 140CFG01600 terminal block.

CableFast Cabling 840 USE 100 00 September 2002 891 140CFG01600 Quantum CableFast Cabling Block Overview The G block is a high-power output block used on both AC and DC circuits requiring up to 2 A. Individual fusing is provided and may be used in both 1- and 2-wire installations. It is also used fo...

Page 37 - GND

CableFast Cabling 840 USE 100 00 September 2002 893 Wiring Diagram for Isolated AC Input Mode The following figure shows the 140CFG01600 wiring for the input (isolated AC input mode) modules: 140DAI34000, 140DAI44000, and 140DAI54000. VA- 1 +/- 1 VA- 2 +/- 2 VA- 3 +/- 3 VA- 4 +/- 4 VB- 5 +/- 5 VB- 6...

Page 40 - The GND (ground) terminal points are not connected

CableFast Cabling 896 840 USE 100 00 September 2002 Note: 1. The terminal block commoning strip, Modicon # 140CFX00110 (Qty. 10), can be used to jumper the power between groups. 2. The GND (ground) terminal points are not connected

Page 46 - Current IN; Source

CableFast Cabling 902 840 USE 100 00 September 2002 Wiring Diagram (Source Grounding) The following figure shows the wiring for the 140CFH00800 (source grounding) module. S1 1+ 1- V1+ Field Side Connections Current IN Loop Power Required + - Module Input 1 (+) S2 2+ 2- V2+ S3 3+ 3- V3+ S4 4+ 4- V4+ ...

Page 47 - and

CableFast Cabling 840 USE 100 00 September 2002 903 Note: 1. When using a single power supply, there will be no channel-to-channel isolation of input points. 2. For the required jumper options for the 140ACI03000 and the 140AVI03000, see the wiring diagrams in 140ACI03000 I/O Analog In Module, p. 53...

Page 56 - Jumper Part Number

CableFast Cabling 912 840 USE 100 00 September 2002 Wiring Diagram (Instrument Grounding) The following figure shows the wiring for the140CFI00800 (instrument grounding) module. S1 1+ 1- V1+ Field Side Connections Jumper (See jumper information below) Voltage Source Current IN Loop Power Required + ...

Page 74 - and the

CableFast Cabling 930 840 USE 100 00 September 2002 Note: 1. When used with the 140AVO02000 analog voltage out module, the master override connections and range select must be made on the Quantum I/O connector. 2. When using a single power supply, there will be no channel-to-channel isolation of inp...

Page 77 - The following table shows the CableFast cable specifications.; Cable Specifications

CableFast Cabling 840 USE 100 00 September 2002 933 CableFast Cables Overview This section provides CableFast cable specifications, cable lengths, inner wire color codes (for standard and high power cables), cable selections, and accessories. Cable Specifications The following table shows the CableF...

Page 78 - Cable Lengths

CableFast Cabling 934 840 USE 100 00 September 2002 Cable Lengths The following table shows the cable lengths for the CableFast system. Cable Lengths Terminated Pigtail Standard Power High Power High Power 3 ft. (0.91 m) X X 6 ft. (1.82 m) X X X 9 ft. (2.73 m) X X 12 ft. (3.64 m) X X 15 ft. (4.6 m) ...

Page 80 - The following table shows the 140XTS0xx terminated cables.

CableFast Cabling 936 840 USE 100 00 September 2002 Cable Selections (XTS) The following table shows the 140XTS0xx terminated cables. 15 26 20 White/ Red 35 26 20 White/ Brown/ Orange 16 26 20 White/ Orange 36 26 20 White/ Brown/ Yellow 17 26 20 White/ Yellow 37 26 20 White/ Brown/ Green 18 26 20 Wh...

Page 81 - Pigtail Leads; The following figure shows the color coded pigtail leads.; See cable lengths; Part Number; CableFast system cable, 6 ft; 0 Color Coded

CableFast Cabling 840 USE 100 00 September 2002 937 I/O Connector for Quantum The following figure shows the I/O Connector for the Quantum system. XCA102xx Pigtail The following table shows the 140XCA102xx Pigtail cable description. Pigtail Leads The following figure shows the color coded pigtail le...

Page 82 - The following table shows the 140XTS102xx Pigtail cables.; CableFast system cable with; Connector

CableFast Cabling 938 840 USE 100 00 September 2002 XTS102xx Pigtail The following table shows the 140XTS102xx Pigtail cables. I/O Connector for Pigtail Leads The following figure shows the I/O connector for pigtail leads. Part Number Cable Type Cable Description Standard Power High Power 140XTS1020...

Page 83 - CableFast Accessories; The following figure shows the terminal block common strip.; Fuse Kit, Wickmann 4 A; The jumper is used instead of fuses as a disconnect device.

CableFast Cabling 840 USE 100 00 September 2002 939 CableFast Accessories Overview The following information pertains to the CableFast accessories. Accessories The following table shows the part numbers and descriptions for CableFast Accessories. Terminal Block Common Strip The following figure show...

Table of Contents:

Summary

Other AEG Models