AEG 1246 EL- User Manual

Main features of your washing machine • Programme and temperature setting using the programme selector. • Stain programme for effectively treating stained washing. • Energy saving programme for normally soiled cotton items. • Speed for the final spin can be reduced to 800, 700 or 500 rpm for model 1...

Description of the appliance Front view 9 Drain pump Door Control panel Detergent drawer Adjustable feet 1200 900700500 95E 60 40 - 60 MIX 4030 95 60 50 40 40 40 30 40 30 1046EL 132986190.qxd 16/02/2005 11:56 Pagina 9

11 Position at 40°C = Easy to iron. In this position the laundry is gently washed and spun to avoid anycreasing. In this way ironing is easier. Position = cold wash Position = reset programme/switching off START/PAUSE button This button has two functions: a) Start After having selected the required ...

12 Description of the appliance Programme Option buttons Depending on the programme, different functions can be combined.These must be selected after choosing the desired programme andbefore depressing the START/PAUSE button.When these buttons are pressed, the corresponding pilot lights come on.When...

13 QUICK By pressing this button the washing time is reduced. For use whenwashing lightly soiled laundry.This option is not available with the wool and economy programmes (95E, 60°, 40°-60°MIX). SPIN SPEED 1046EL 1246EL Press this button to reduce the maximum speedof the final speed proposed by the ...

Programme progress display By selecting the wash programme, the pilot lights corre-sponding to the various phases making up the pro-gramme come on.After the machine has started, only the runningphase pilot light stays on. When the programme hasfinished, the END pilot light comes on. When the program...

Cancelling a programme To cancel a programme which is running, turn the programme selectordial to the RESET O position. Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O and then to the DRAIN programme or to the / (SPIN/DELICATE SPIN)...

Detergent dispenser drawer Compartment for prewash or soak detergent and stain remover. The prewashor soak detergent is added at the beginning of the wash programme. Thestain remover is added during the STAIN-Action phase in the main wash. Compartment for powder or liquid detergent used for main was...

Preparing the wash cycle Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming ...

Weight of laundry Types of fabric and care labels The labels on garments help you to select the most suitable wash pro-gramme. The laundry should be sorted out according to the type of fab-ric and the instructions indicated on care labels.Temperatures indicated on labels are always maximum temperatu...

Detergents and additives Which detergent and additive? Use only detergents and additives for washing machines. Follow themanufacturer’s instructions. How much detergent? The quantity depends on: • the load: if the manufacturer does not provide any indications on the amount ofdetergent for small load...

21 How to wash Load the laundry Open the door. Place the laundry in the drum, one item at a time. Distribute laundry asevenly as possible. Close the door. Add detergent and additive Pull the drawerout till it stops. Pour the mainwash detergentinto compart-ment . If you wish toperform a PRE-WASH, a S...

EXTRA RINSE This appliance is designed for saving water. However, for people witha very delicate skin (allergic to detergents) it may be necessary torinse the laundry using an extra quantity of water (extra rinse). The extra rinse is available only with the cotton, synthetics or delicateprogramme. S...

Starting the programme 1. Check that the water tap is open. 2. Press START/PAUSE to start the programme.If the Delay Start option has been selected theprogramme will start at the end of the count-down.If the DOOR light is red and flashing for some seconds and when it goes out the END light starts fl...

25 How to wash At the end of the programme The machine stops automatically. A zero appears on the display. TheEND light comes on in the programme progress display. The START/PAUSE button is off, the DOOR light is green. If the light (OVERDOSAGE) comes on it indicates that too much detergent has been...

26 Programme chart Wash programmes In compliance with EC directive 92/75, the consumption figures indicat-ed on the energy label refer to the 60°C wash programme for cotton witha load of 4,5 kg.* The consumption data shown on this chart is to be considered purelyindicative, as it may vary depending ...

Programme chart Special programmes * The consumption data shown on this chart is to be considered purelyindicative, as it may vary depending on the quantity and type of laundry,on the inlet water temperature and on the ambient temperature. It refersto a load of 4,5 kg for cotton items. 27 Programme ...

Cleaning and maintenance After each wash At the end of the wash programme, pull the dispenser drawer out a lit-tle to let it dry. Leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: Close the water tap and unplug the appliance. Periodical cleaning Exteri...

Door seal Check from time to time the door seal andeliminate eventual possible objects that couldbe trapped in the fold. Drain pump The pump should be inspected regularly andparticularly if the machine does not empty and/or spin the machine makes an unusual noise during draining due to objectssuch a...

30 Cleaning and maintenance Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap. Emergency emptying out If the water is not discharged (pump is blocked, filter or drain pipe areclogged), proceed as follows to empty out the machine: • pull out the plug...

Something not working? If during the spin cycle the machine makes an unusualwhistling noise, different from the noise made by tradi-tional washing machines, this is due to a new type ofmotor. If water is not visible in the drum, this is due tothe modern technology of new washingmachines that use les...

34 Something not working? Unsatisfactory washing results If the laundry looks grey and lime scale is found in the drum • Too little detergent has been used. • An unsuitable detergent has been used. • Stubborn stains have not been treated prior to washing. • The programme/temperature has not been cor...

Technical data Height x Width x Depth 84x60x42 cm Depth with door opened 88 cm Height adjustment ± 10 mm approx. Load (depending on programme) 4,5 kg max. Use domesticDrum speed during washing max. 55 rpm Drum speed during spinning 1000/800/700/500 rpm (1046 EL) 1200/900/700/500 rpm (1246 EL) Water ...

Service In the section “Something not working?” some problems that can besolved by yourself are listed. Read this section in the event of problems.If you are not able to find a solution, contact the Service centre.(Addresses and telephone numbers are given on the enclosed leaflet).In all cases, expl...

37 Instructions for installation and electrical connection Safety instructions for the installer • This appliance is heavy, care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer. • All internal packing m...

38 Dimensions of the appliance Front view and side view Rear view 105 1200 900700500 95E 60 40 - 60 MIX 4030 95 60 50 40 40 40 30 40 30 1046EL Cold water 335 170 70 40 45 85 Power cable Drain 420 440 880 132986190.qxd 16/02/2005 11:56 Pagina 38

39 Installation Unpacking All transit bolts and packing must be removed before using the appli-ance. Using a spanner,unscrew andremove the 2 rearbottom screws.Slide out the 2plastic pins. Laythe machine on itsback, taking carenot to squash thehoses. This can beavoided by placing one of the corner pa...

Positioning Install the machine on a flat hard floor.Make sure that air circulation around the machine is not impeded bycarpets, rugs etc.• Before placing it on small tiles, apply a rubber coating.• Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar mate...

The other end of the inlet hose which connects to the machine can beturned in any direction. Simply loosen the fitting, rotate the hose andretighten the fitting, making sure there are no water leaks.The inlet hose must not be lengthened. If it is too short and you do notwish to move the tap, you wil...

Connect the machine to an earthed socket. The manufacturer does not accept any responsibility for damage orinjury through failure to comply with the above safety precaution. Permanent connection In the case of a permanent connection it is necessary that you install adouble pole switch between the ap...