ADTRAN NetVanta Series - Manual
ADTRAN NetVanta Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Connect to the NetVanta 4305; Configure a; Configure the Ethernet Interface
- Page 3 – Configure a Telnet Session; Set the Enable Security Mode Password; Configure the Frame Relay Virtual Interface
- Page 6 – Create an Octal T1 Multilink Cross-Connect
Technical Support 1-888-4ADTRAN (1-888-423-8726)
NetVanta
Series
(with Octal T1 Wide Module)
Quick Configuration Guide
61200890L1-42B
November 2004
•
A VT100 terminal or a PC with VT100 emulator software for connecting to the unit.
•
DB-9 (male) to DB-9 (female) straight-through serial cable for configuring the unit.
•
Appropriate cable(s) for connecting the system to the existing network.
Multilink PPP Internet Access
Equipment Required
The configuration sections of this quick configuration guide are formatted to provide
step-by-step text descriptions for selected applications. The configuration parameters
used in the example outlined in this document are for instructional purposes only. Please
replace all bold underlined entries (
example
) with your specific parameters to configure
your application.
Network Diagram
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61200890L1-42B 1. Connect a VT100 terminal (or PC with VT100 emulation software) to the NetVanta CONSOLE port using a DB-9 (male) to DB-9 (female) straight-through serial cable. 2. Configure the COM port with the following parameters: Data Rate: 960...
61200890L1-42B Technical Support 1-888-4ADTRAN (1-888-423-8726) 3 The following steps show how to access the Telnet configuration parameters and change the password. The default password for initializing a Telnet session is password (all lowercase). For security purposes, change the password to some...
6 Technical Support 1-888-4ADTRAN (1-888-423-8726) 61200890L1-42B 1. Enter interface t1 3/1 to activate the first T1 interface configuration mode on the Octal T1 Wide Module. 2. Enter tdm group 1 timeslots 1-24 to create a TDM group for DS0s 1 through 24 on the T1 connections. 3. Enter no shutdown t...
