ADTRAN D4-U-RPM - Manual
ADTRAN D4-U-RPM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SECTION 61100022L1-5
PAGE 1
FIGURE 1. ADTRAN D4 U-RPM
61100.022L1-5C
C A U T I O N
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
PRACTICES
®
WECO is a registered trademark of AT&T Technologies
Contents
Paragraph
Page
1.
General ............................................................ 1
Figure 1. ADTRAN D4 U-RPM ......................................... 1
2.
Installation ....................................................... 2
Figure 2. U-RPM Application ........................................... 2
Table A. U-RPM Option Selections ................................. 2
3.
Connections .................................................... 2
Figure 3. Connector Pin Assignments ........................... 3
Figure 4. U-RPM Option Locations ................................. 3
4.
Maintenance .................................................... 3
5.
Warranty And Customer Service .................. 3
MODEL U-RPM
D4-U-RPM
U-REPEATER POWERING MODULE
INSTALLATION/MAINTENANCE
1.0
GENERAL
1.01
T h i s s e c t i o n p r o v i d e s i n s t a l l a t i o n a n d
maintenance
information for the ADTRAN U-Repeater
Powering Module (U-RPM), Part Number: 1100022L1.
Figure 1 shows the front of the unit. Figure 2 represents
a generic module application. Figure 3 shows the
connector pin assignments for the U-RPM. The unit's
part number and basic features are:
Section 61100022L1-5
Issue 3, April 1992
CLEI Code # DDRPG701_ _
Part
Equipment
Number
Features
U-Repeater
1100022L1
Repeater Powering for
Powering
ADTRAN ISDN mid-point loop
Module
repeater; Loop resistance fault
(U-RPM)
indicator; Class A2 or Class A3
operation.
1.02
This practice has been reissued to reflect the
addition of a field selectable powering option in
Paragraph 2.04 and Figure 4 and the latest CLEI
designation. Issue 3 adds a new Sales telephone number.
1.03
The U-RPM is a channel plug-in used in the
ADTRAN GPC-1 or AD4-24 Shelves or the
WECO
®
D4 channel bank, to provide sealing current
power for the ADTRAN ISDN mid-point loop repeater.
1.04
The U-RPM provides three functions for the
ADTRAN ISDN mid-point loop repeater. These
functions are:
1.
The D4-U-RPM receives -48 VDC power
from the facility power source and sends
constant 85 mA of sealing current down
the loop to power the U-Repeater.
2.
A passive customer data flow is allowed
through the D4-U-RPM.
3.
The D4-U-RPM monitors the line for
excessive resistance or open conditions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
